Abstract:A surface-modified D-type photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) is reported for application as a polarization filter and refractive index sensor. The gold film is deposited on the surface of the designed fiber structure to stimulate the SPR effect. Through etching, the upper surface of the designed structure forms an angle of 170°. The etching angle changes the distance between the fiber core and the surface of gold film to enhance the local field SPR effect. The designed optical device is numerically simulated using the finite element method (FEM), the mode distribution is studied, and the coupling phenomenon is analyzed. At a wavelength of 1.31 μm, the y-polarization loss is 1307.90 dB/cm, while the loss of x-polarization is 1.13 dB/cm; at 1.55 μm, the y-polarization loss is 1755.19 dB/cm, while the x-polarization loss is only 1.24 dB/cm. In the case of the same structure parameters as the proposed polarization filter, of which communication window is 1.55 μm, the designed structure also serves as a refractive index sensor from 1.330 to 1.365. The average sensitivity of the refractive index sensor is up to 4857 nm/RIU, and the highest sensitivity is 7588 nm/RIU when the refractive index is 1.365. The results show that the reported SPR-based PCF simultaneously implements dual communication window polarization filtering and refractive index sensing. Hence, the designed device has promising applications with good filtering and sensing performance.

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Terahertz Circular Photonic Crystal Fiber

Highly Birefringent Photonic Crystal Fibers with Near-zero Flattened Dispersion for Polarization-Maintaining Terahertz Transmission

Terahertz Switch and Polarization Controller Based on Photonic Crystal Fiber

Highly birefringent hexagonal porous core photonic crystal fiber for polarization maintaining integrated THz-photonics applications

Design and Numerical Analysis of A Thz Square Porous-Core Photonic Crystal Fiber for Low Flattened Dispersion, Ultrahigh Birefringence

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

Planar Terahertz Photonics Mediated by Liquid Crystal Polymers

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Highly birefringent elliptical-hole photonic crystal fiber with squeezed hexagonal lattice.

Photonic Crystal Fibers with Squeezed Hexagonal Lattice.

Research on Novel Single-Mode Polarization Maintaining Photonic Crystal Fiber

Design of Highly Birefringent and Low-Loss Oligoporous-Core THz Photonic Crystal Fiber with Single Circular Air-Hole Unit

Tunable Terahertz Elements Enabled by Liquid Crystals and Liquid Crystal Polymers

THz dual-core liquid photonic crystal fiber with high negative dispersion

Passive Polarization Rotator Based on Silica Photonic Crystal Fiber for 1.31-Μm and 1.55-Μm Bands Via Adjusting the Fiber Length

Broadband tuning multifunctional photonic crystal fiber for terahertz device

Terahertz liquid crystal suspended core photonic crystal fiber polarization rotator

Advances in Silica-Based Large Mode Area and Polarization-Maintaining Photonic Crystal Fiber Research

A Broadband Low Loss and High Birefringence Terahertz Photonic Bandgap Photonic Crystal Fiber