Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance

Large mode-area all-solid anti-resonant fiber based on chalcogenide glass for mid-infrared transmission.

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

A simplified Mid-infrared anti-resonant chalcogenide fiber with fewest resonant peaks

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Single-mode large-mode-area double-ring hollow-core anti-resonant fiber for high power delivery in mid-infrared region

Mid-infrared Seven-core Chalcogenide Fiber with Ultra-Large Mode Field Area and High Beam Quality

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

Integration of an anti-resonant hollow-core fiber with a multimode Yb-doped fiber for high power near-diffraction-limited laser operation

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Design and fabrication of a tellurite hollow-core anti-resonant fiber for mid-infrared applications

High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

A Mid-Infrared Multifunctional Optical Device Based on Fiber Integrated Metasurfaces

Simulation of the Structural Parameters of Anti-resonant Hollow-core Photonic Crystal Fibers

Single-mode bend-resistant hollow-core fiber with multi-size anti-resonant elements

Large-Mode-Area Multi-Resonant All-Solid Photonic Bandgap Fiber with Low Bending Loss and Robust Single-Mode Operation

Watt-scale near-diffraction-limited mid-infrared laser delivery by a chalcogenide anti-resonant fiber

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.