Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Large mode-area all-solid anti-resonant fiber based on chalcogenide glass for mid-infrared transmission.

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

All-Solid Chalcogenide Microstructured Optical Fiber with Two Zero-Dispersion Mid-Infrared Wavelengths

Single-mode suspended large-core chalcohalide fiber with a low zero-dispersion wavelength for supercontinuum generation

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

Broadband Mid-Infrared Fiber Optical Parametric Oscillator Based on a Three-Hole Suspended-Core Chalcogenide Fiber.

Single-mode large-mode-area double-ring hollow-core anti-resonant fiber for high power delivery in mid-infrared region

Mid-infrared Seven-core Chalcogenide Fiber with Ultra-Large Mode Field Area and High Beam Quality

A simplified Mid-infrared anti-resonant chalcogenide fiber with fewest resonant peaks

Design of hexagonal chalcogenide photonic crystal fiber with ultra-flattened dispersion in mid-infrared wavelength spectrum

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Mid-infrared microfiber Bragg gratings

Low-loss, robust fusion splicing of silica to chalcogenide fiber for integrated mid-infrared laser technology development

A Mid-Infrared Ultrawide-Bandwidth Single-Polarization Single-Mode Fiber Based on a Twin-Tube Structure

Tapered Chalcogenide-Glass Rods for Multi-Octave Mid-Infrared Supercontinuum Generation

Broadband flat supercontinuum generated by chalcogenide double-clad step-index fiber with special dispersion

Ultra-high birefringence mid-infrared Ge20Sb15Se65 chalcogenide glass photonic crystal fiber with low confinement loss

Mid-Infrared Single-Mode Ge-As-S Fiber for High Power Laser Delivery