Abstract:Limited by stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and transverse mode instability (TMI), it is challenging to achieve high-power laser output in ytterbium-doped fiber (YDF) lasers with operating wavelengths less than 1060 nm. In high-power fiber lasers, bi-tapered YDF can provide a balance between the suppression of SRS and TMI. In this work, we designed and fabricated a new double-cladding asymmetric bi-tapered YDF to suppress ASE and SRS in the 1050 nm monolithic fiber laser. The asymmetric bi-tapered YDF has an input end with a core/cladding diameter of ~20/400 μm, a middle section with a core/cladding diameter of ~30/600 μm and an output end with a core/cladding diameter of ~25/500 μm. The working temperature of the non-wavelength-stabilized 976 nm laser diodes was optimized to improve the TMI threshold. An output power of over 5 kW with an efficiency of 83.1% and a beam quality factor M2 of about 1.47 were achieved. To the best of our knowledge, this represents the highest power nearly-single mode in 1050 nm fiber lasers. This work demonstrates the potential of asymmetric bi-tapered YDF for achieving a high-power laser with high beam quality in 1050 nm fiber lasers.

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

Coherent mode-combined ultra-narrow-linewidth single-mode micro-disk laser

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Large-mode-area Nd-doped anti-resonant phosphate fiber for high-power single-mode 900 nm laser generation

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

Design of a large-mode-area pixeled leakage channel fiber with an ultrahigh loss ratio for 2 µm operation

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Ultralow bending-loss micro-structured fiber with large-mode-area

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Wideband, large mode field and single vector mode transmission in a 37-cell hollow-core photonic bandgap fiber

Large-Mode-Area Neodymium-Doped All-Solid Double-Cladding Silicate Photonic Bandgap Fiber With A 32 Mu M Core Diameter

Extending single mode performance of all-solid large-mode-area single trench fiber

Fabrication and properties of domestic long tapered ytterbium-doped fiber with high tapering ratio