Abstract:In this paper, we have theoretically and experimentally demonstrated a novel large-mode-area multi-resonant all-solid photonic bandgap fiber (AS-PBGF). Based on the combination of the multi-resonant structure and leakage channel, the structural parameters are specifically designed for conventional applications of fiber lasers around 1 μm wavelength. Through the stack and draw technique, the fiber is fabricated successfully and the hexagon core is measured to be 46 μm in the corner-to-corner direction. The transmission spectrum exhibits a broad bandwidth from 970 nm to 1180 nm in the 3rd photonic bandgap (PBG). Bending loss lower than 0.1 dB/m with a 5-m-length fiber is obtained in the case of bending radius R > 25 cm. By employing the spatially and spectrally resolved imaging (S2) method, robust single-mode (SM) operation of the fiber is verified within the whole PBG. In addition, we also report a phenomenon about the abnormal variation of M2 within the low loss region of the 3rd PBG. The evolution of beam quality within the 3rd PBG appears as a U-shaped curve rather than a constant. Based on the measured M2 and S2 results, a preliminary conclusion about the relationship between the beam quality and SM characteristics in AS-PBGF, which is quite different from that in conventional SIFs, is demonstrated experimentally for the first time.

Large-Mode-Area Neodymium-Doped All-Solid Double-Cladding Silicate Photonic Bandgap Fiber With A 32 Mu M Core Diameter

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Large-mode-area neodymium-doped all-solid double-cladding silicate photonic bandgap fiber with an index step of similar to 0.5%

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

Design of A Solid-Core Large-Mode-Area Bragg Fiber

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

Large-mode-area Nd-doped anti-resonant phosphate fiber for high-power single-mode 900 nm laser generation

Large-Mode-Area Multi-Resonant All-Solid Photonic Bandgap Fiber with Low Bending Loss and Robust Single-Mode Operation

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Wideband, large mode field and single vector mode transmission in a 37-cell hollow-core photonic bandgap fiber

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

Single-mode large-mode-area double-ring hollow-core anti-resonant fiber for high power delivery in mid-infrared region

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Design of photonic band gap fibers with suppressed higher-order modes: towards the development of effectively single mode large hollow-core fiber platforms

Phosphate Single Mode Large Mode Area All-Solid Photonic Crystal Fiber With Multi-Watt Output Power

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Extending single mode performance of all-solid large-mode-area single trench fiber

Theoretical study and experimental fabrication of high negative dispersion photonic crystal fiber with large area mode field.

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes