Abstract:In this article, we demonstrate great potential of lightly-erbium(Er 3+ )-doped ZrF 4 fiber in efficient power scaling at ∼2.8 μm, when excited at ∼1.7 μm. Core-pumped by a random Raman fiber laser at 1.69 μm, the 1.5 mol.% Er 3+ -doped ZrF 4 fiber in a F-P cavity has experimentally yielded an output power of >6 W at 2.783 μm with a slope efficiency of up to 58.4% (with respect to the absorbed pump), close to its Stokes limit of 60.7% (1.69/2.783). To our knowledge, this is the highest efficiency of Er 3+ -doped ZrF 4 fiber lasers in the mid-infrared. Further power scaling is only limited by the current pump power. Based on the validated numerical model, the dominant role of the excited state absorption (ESA) process (i.e., $^4{\mathrm{I}}_{13/2}{ \to }^4{\mathrm{I}}_{9/2}$ ) in exciting efficient ∼2.8 μm laser has been highlighted, and the resonant ground state absorption process (i.e., $^4{\mathrm{I}}_{15/2}{ \to }^4{\mathrm{I}}_{13/2}$ ) is also essential. The simulation results indicate that the pump wavelength closer to the ESA peak can yield a higher slope efficiency. In addition, heat load analyses via numerical modeling reveals that the $^4{\mathrm{I}}_{9/2}{ \to }^4{\mathrm{I}}_{11/2}$ multiphonon relaxation is the main heat source of the system. By taking fiber optical damage limit into account simultaneously, a high-power lightly-Er 3+ -doped ZrF 4 fiber laser arrangement has been proposed, which theoretically enables 100-W-class output under a slope efficiency of >50% and a relatively low heat load.

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

Modeling Rare-Earth Doped Microfiber Ring Lasers

Demonstration of hundred-watt-level near-diffraction-limited monolithic fiber laser near 980?nm with step-index double-cladding Yb-doped fiber

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

Large-mode-area neodymium-doped all-solid double-cladding silicate photonic bandgap fiber with an index step of similar to 0.5%

Large-Mode-Area Neodymium-Doped All-Solid Double-Cladding Silicate Photonic Bandgap Fiber With A 32 Mu M Core Diameter

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Large-mode-area Nd-doped anti-resonant phosphate fiber for high-power single-mode 900 nm laser generation

Nd3+-doped Double-Clad Fluoro-Sulfo-phosphate Fiber for Compact Kilohertz-Linewidth Single-Frequency Laser

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Numerical Study of a Bi-Directional In-Band Pumped Dysprosium-Doped Fluoride Fiber Laser at 3.2 Μm

Extending single mode performance of all-solid large-mode-area single trench fiber

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

High-gain Fluoro-Sulfo-phosphate-based Active Fiber for Compact Low-Threshold Kilohertz-Linewidth Single-Frequency Fiber Laser

Fabrication and properties of domestic long tapered ytterbium-doped fiber with high tapering ratio

Towards High-Power And-Efficiency ∼2.8 Μm Lasing: Lightly-Erbium-Doped ZrF4 Fiber Laser Pumped at ∼1.7 Μm

Quasi Single-Mode Fiber With Record-Low Attenuation of 0.1400 dB/km

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Towards High-Power and -Efficiency ∼2.8 Μm Lasing: Lightly-Erbium-Doped ZrF Fiber Laser Pumped at ∼1.7 Μm