Abstract:Abstract Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality ( M 2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

Demonstration of hundred-watt-level near-diffraction-limited monolithic fiber laser near 980?nm with step-index double-cladding Yb-doped fiber

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Demonstration of Microfiber Knot Laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

A 110-W Fiber Laser with Homemade Double-Clad Fiber

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

Single-frequency fiber laser of 315 mW at 1940 nm based on a Tm : YAG/Ho : YAG-co-derived silica fiber

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Review of High-Power Continuous Wave Yb-Doped Fiber Lasers near 980 nm

Near diffraction limit output of a coiled 20/400 m Yb-doped fiber laser

Continous-wave and passively Q-switched laser at 1.36 μm of a Nd^3+-doped phosphate fiber with a Yb^3+-doped inner cladding

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

Demonstration of 3kW × 2 ports bidirectional output oscillating-amplifying integrated fiber laser employing chirped and tilted fiber Bragg gratings for co-SRS suppression

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure