Abstract:S-band fiber lasers, one type of ytterbium doped fiber lasers(YDFLs) which emitting in the spectral region of 1010 nm similar to 1050 nm, have drawn more and more attention especially after the proposition of tandem pump fiber lasers. The S-band laser plays an important role as the pump in a tandem pumping scheme. However, high power S-band laser output is quite difficult because of severe re-absorption. Therefore, the optical properties of S-band fiber lasers are studied and methods to achieve high power S-band laser output are presented. An S-band laser emission model based on gain comparison is built for analyzing the mechanism of laser oscillation and amplification. The model is composed of rate equations and gain comparison of several wavelengths in ASE spectrum. The gain differential between laser wavelength and ASE peak wavelength is compared to the additional gain imposed by cavity mirrors in an oscillator or the seed in an amplifier. The comparison results help in concluding the feasibility of S-band laser emission. Based on the model, the influences of fiber properties (including core doping level, core -clad ratio, and fiber length), pump power and laser power on the operation of S-band fiber lasers or amplifiers are researched. The analysis shows that fibers with lower doping level, larger core-clad ratio and shorter length, seed with higher power, are more helpful in realizing high power S-band laser output. Also, the profile of oscillator is found more suitable in building high power S-band lasers than that of amplifier.

Review of High-Power Continuous Wave Yb-Doped Fiber Lasers near 980 nm

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

Review of Recent Progress on Single-Frequency Fiber Lasers

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Demonstration of hundred-watt-level near-diffraction-limited monolithic fiber laser near 980?nm with step-index double-cladding Yb-doped fiber

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

High-power CW 1048 nm Yb:YAG Dual-Ended Diode-pumped zigzag slab Laser

Suppression of the Low Frequency Intensity Noise of a Single-Frequency Yb3+-doped Phosphate Fiber Laser at 1083 Nm

High Power Continuous-Wave and Cavity-Dumped Yb∶YAG Thin Disk Lasers

Single Frequency High-Peak-power Fiber Laser by Suppression of SBS

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

Experimental and Theoretical Study of Dual-Wavelength Continuous-wave Laser in Yb:YAG at 1030 and 1048 nm

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

High-power and high-energy coherent sources at 1.1-μm based on compact diode-end-pumped Nd:YAG crystal fiber lasers

Optical Properties of High Power S-Band Fiber Oscillators and Amplifiers

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

Experimental Investigation of High Power Pulsed 2.8 Μm Er3+-doped ZBLAN Fiber Lasers

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure