Abstract:Limited by stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and transverse mode instability (TMI), it is challenging to achieve high-power laser output in ytterbium-doped fiber (YDF) lasers with operating wavelengths less than 1060 nm. In high-power fiber lasers, bi-tapered YDF can provide a balance between the suppression of SRS and TMI. In this work, we designed and fabricated a new double-cladding asymmetric bi-tapered YDF to suppress ASE and SRS in the 1050 nm monolithic fiber laser. The asymmetric bi-tapered YDF has an input end with a core/cladding diameter of ~20/400 μm, a middle section with a core/cladding diameter of ~30/600 μm and an output end with a core/cladding diameter of ~25/500 μm. The working temperature of the non-wavelength-stabilized 976 nm laser diodes was optimized to improve the TMI threshold. An output power of over 5 kW with an efficiency of 83.1% and a beam quality factor M2 of about 1.47 were achieved. To the best of our knowledge, this represents the highest power nearly-single mode in 1050 nm fiber lasers. This work demonstrates the potential of asymmetric bi-tapered YDF for achieving a high-power laser with high beam quality in 1050 nm fiber lasers.

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

1535–1620 Nm Widely Tunable Watt-Level Single-Mode Er:Yb Codoped All-Fiber MOPA

High power narrow-linewidth linearly-polarized 1610 nm Er:Yb all-fiber MOPA

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration.

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.

302 W single-mode power from an Er/Yb fiber MOPA

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

End-Pumped 300 W Continuous-Wave Ytterbium-Doped All-Fiber Laser With Master Oscillator Multi-Stage Power Amplifiers Configuration