Abstract:Abstract Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality ( M 2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

Near diffraction limit output of a coiled 20/400 m Yb-doped fiber laser

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

A 6.4-kW peak power near-single-mode quasi-continuous wave fiber laser oscillator employing spindle-shaped ytterbium-doped fiber

High-temperature-insensitivity high-power Yb-doped fiber laser directly in-band pumping by 1018 nm laser diodes

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

~1 µm laser output based on heterogeneous fiber with Yb3+-doped fluorophosphate core and phosphate cladding

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

Broadband tunable single-frequency Yb-doped fiber laser with dual ring subcavity and Sagnac ring filter

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Diode-Pumped High Efficient Tm : Ylf Laser Output At 1908 Nm With Near-Diffraction Limited Beam Quality

A 110-W Fiber Laser with Homemade Double-Clad Fiber

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality

Demonstration of hundred-watt-level near-diffraction-limited monolithic fiber laser near 980?nm with step-index double-cladding Yb-doped fiber

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency