Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Design of a large-mode-area pixeled leakage channel fiber with an ultrahigh loss ratio for 2 µm operation

Ultralow bending-loss micro-structured fiber with large-mode-area

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

Ultra-Long Subwavelength Micro/Nanofibers with Low Loss

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Large-Mode-Area Multi-Resonant All-Solid Photonic Bandgap Fiber with Low Bending Loss and Robust Single-Mode Operation

Single-mode large-mode-area double-ring hollow-core anti-resonant fiber for high power delivery in mid-infrared region

Leakage channel fibers with microstuctured cladding elements: a unique LMA platform

All-Glass Single-Mode Leakage Channel Microstructured Optical Fibers with Large Mode Area and Low Bending Loss

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Highly bend compensated large mode area segmented cladding fiber with high index circular multitrench in core

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

All-glass leakage channel microstructured optical fibers with large mode area and low bending loss

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

All-solid bend-resistant large mode area fiber design with highly doped rods in the cladding

Multi-trench fiber with four gaps for improved bend performance

An optimized configuration of large mode field area PMMA photonic crystal fiber with low bending loss: a new approach