Abstract:<p>The multi-objective orthogonal optimization combined with gray relational analysis method is presented for designing large mode area all-solid-fiber with effective single-mode operation in the bent state. The bending performance of fiber was carried out taking the bending loss and effective mode area as objective functions, taking the width of inner-trench, width of resonant ring, refractive index of the inner- trench, the distance from the out-trench to the resonant ring, the width of out-trench and the refractive index of the out-trench as design variables. The results show the resonance ring added in the core can enhance the coupling between the high-order mode and the cladding mode and filter out the high-order mode to ensure the single-mode operation. The trench added to the cladding can increase the refractive index difference between the core and the cladding. The bending loss of the fundamental mode is limited and the anti-bending loss performance of the fiber is enhanced. After optimization, the bending loss is 0.00953 dB/m and the effective mode area can reach 776.45 µm<sup>2</sup>. Under the same bending radius, the bending loss of the designed optical fiber was reduced by an order of magnitude, the effective mode field area increased by 7.5%, and the Loss Ratio increased double. This kind of fiber shows great potential in compact fiber communication, high power fiber lasers and amplifiers.</p>

Multi-trench fiber with four gaps for improved bend performance

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Large mode area multi segmented-trench crisscross fiber with resonance and leakage

Robustness of the modified multi-trench fiber design with two gaps

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Design of a large-mode-area pixeled leakage channel fiber with an ultrahigh loss ratio for 2 µm operation

Large mode area single mode photonic crystal fiber with ultra-low bending loss

A Compact Trench-Assisted Multi-Orbital-Angular-Momentum Multi-Ring Fiber for Ultrahigh-Density Space-Division Multiplexing (19 Rings × 22 Modes)

Large-Mode-Area Multi-Resonant All-Solid Photonic Bandgap Fiber with Low Bending Loss and Robust Single-Mode Operation

Ultralow bending-loss micro-structured fiber with large-mode-area

Extending single mode performance of all-solid large-mode-area single trench fiber

Fourteen-core Dual-Mode Fiber with Low Bending Loss and Large Mode Area

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Mode transmission performance study of a novel heterogeneous helical cladding fiber with an isolation ring

A Novel Three-Ring-core Few-Mode Fiber with Large Effective Area and Low Nonlinear Coefficient

Highly bend compensated large mode area segmented cladding fiber with high index circular multitrench in core

A weakly-coupled air-hole-bow-tie-assisted few-mode fiber for short-haul MDM across C + L band

Detailed study of bending effects in large mode area segmented cladding fibers

Optimal design of large mode area all-solid-fiber using a gray relational optimization technique