Abstract:<p>The multi-objective orthogonal optimization combined with gray relational analysis method is presented for designing large mode area all-solid-fiber with effective single-mode operation in the bent state. The bending performance of fiber was carried out taking the bending loss and effective mode area as objective functions, taking the width of inner-trench, width of resonant ring, refractive index of the inner- trench, the distance from the out-trench to the resonant ring, the width of out-trench and the refractive index of the out-trench as design variables. The results show the resonance ring added in the core can enhance the coupling between the high-order mode and the cladding mode and filter out the high-order mode to ensure the single-mode operation. The trench added to the cladding can increase the refractive index difference between the core and the cladding. The bending loss of the fundamental mode is limited and the anti-bending loss performance of the fiber is enhanced. After optimization, the bending loss is 0.00953 dB/m and the effective mode area can reach 776.45 µm<sup>2</sup>. Under the same bending radius, the bending loss of the designed optical fiber was reduced by an order of magnitude, the effective mode field area increased by 7.5%, and the Loss Ratio increased double. This kind of fiber shows great potential in compact fiber communication, high power fiber lasers and amplifiers.</p>

Large mode area multi segmented-trench crisscross fiber with resonance and leakage

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Multi-trench fiber with four gaps for improved bend performance

Detailed study of bending effects in large mode area segmented cladding fibers

Design and Optimization of Multi-core Fibers with Low Crosstalk and Large Effective Area

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Highly bend compensated large mode area segmented cladding fiber with high index circular multitrench in core

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Ultralow bending-loss micro-structured fiber with large-mode-area

The Optimization of a Segmented Cladding Fiber via the Response Surface Methodology Approach for a Large Mode Area

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Mode transmission performance study of a novel heterogeneous helical cladding fiber with an isolation ring

Supermode Characteristics of Nested Multiple Hollow-Core Anti-Resonant Fibers

Optimal design of large mode area all-solid-fiber using a gray relational optimization technique

A low crosstalk seven-core five-mode fiber for high density transmission and large capacity communication

Design of ring-core few-mode multi-core fiber with low crosstalk and low bending loss

Design of 125-Μm Cladding Diameter Multicore Fibers with High Core Multiplexing Factor for Wideband Optical Transmission

Single-mode Annular Chirally-Coupled Core Fibers for Fiber Lasers

Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

Design of a large-mode-area pixeled leakage channel fiber with an ultrahigh loss ratio for 2 µm operation