Abstract:Few-mode optical fibers have played an increasingly important role in breaking through the transmission capacity limitations of single-mode optical fiber and alleviating the bandwidth crisis in optic fiber communication systems in recent years. Nevertheless, traditional solid core few-mode optical fibers usually suffer from optical fiber nonlinearity and mode coupling, leading to mode crosstalk between channels. Hollow core negative curvature fibers (HC-NCF) have attracted widespread attention due to their advantages such as low latency, low nonlinearity, low dispersion, low transmission loss, and large operating bandwidth. In this work, a novel low-loss few-mode HC-NCF with symmetrically double ring nested tube structure is designed, which supports six core modes including LP 01 、LP 11 、LP 21 、LP 02 、LP 31a 、LP 31b . The designed optical fiber is based on silica dioxide substrate and adopts a unique symmetrical double ring nested cladding structure, which can effectively suppress the coupling between the core mode and the cladding mode. The finite element method (FDE) was used to numerically analyze the properties of the proposed few-mode HC-NCF and optimize the structural parameters of the few-mode HC-NCF. Moreover, the confinement loss and bending loss of all core modes were investigated. The simulation results show that the proposed few-mode HC-NCF can support the independent transmission of six weakly coupled core modes (with the effective refractive index difference greater than 1×10 -4 between the adjacent core modes, which greatly avoids the coupling between the adjacent modes in the fiber core). Within the 400 nm bandwidth (1.23-1.63 μm, covering the O, E, S, C, and L bands), all six modes in the fiber core maintain low loss transmission. Moreover, within the range of 1.3-1.63 μm, the CL of LP 01 , LP 11 and LP 21 modes is less than 1×10 -3 dB/m, and the CL of LP 02 and LP 31b modes is less than 3×10 -3 dB/m. The CL of each mode reached the lowest value at 1.4 μm, and the LP 01 mode has the lowest CL of 4.3×10 -7 dB/m. In addition, for a bending radius of 7 cm, each mode maintains the low bending loss characteristic over a certain operating wavelength range. Within the range of 1.23-1.61 μm, the BL of LP 01 is less than 4.5×10 -4 dB/m, and the BL of LP 11 is less than 1.3×10 -3 dB/m. The tolerance analysis shows that even with a structural parameters deviation of ±1%, the few-mode HC-NCF can still maintain the characteristic of low-loss and weak coupling. The designed few-mode HC-NCF has ultra-low CL and bending-insensitive characteristics, while supporting independent transmission of six modes, which will find huge application potential in the future high performance mode division multiplexing systems.

Single-mode Annular Chirally-Coupled Core Fibers for Fiber Lasers

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Mode transmission performance study of a novel heterogeneous helical cladding fiber with an isolation ring

Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Concentric circular stress region-assisted pseudo-elliptical-ring-core polarization-maintaining few-mode fiber

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Low-loss weak-coupling 6-mode hollow-core negative curvature fiber based on symmetric double-ring nested tube

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

Supermode Characteristics of Nested Multiple Hollow-Core Anti-Resonant Fibers

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Wideband, large mode field and single vector mode transmission in a 37-cell hollow-core photonic bandgap fiber

Design of ring-core few-mode multi-core fiber with low crosstalk and low bending loss

Ultrahigh Transverse Mode Purity by Enhanced Modal Filtering in Double‐Clad Single‐Ring Hollow‐Core Photonic Crystal Fiber

Extending single mode performance of all-solid large-mode-area single trench fiber

A novel nested three-ring-core photonic crystal fiber for OAM transmission

Four-fold truncated double-nested anti-resonant hollow-core fibers with ultralow loss and ultrahigh mode purity

Design of Photonic Crystal Fiber Supporting 190 Orbital Angular Momentum Modes with Low Nonlinearity Coefficient

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification.