Abstract:Few-mode optical fibers have played an increasingly important role in breaking through the transmission capacity limitations of single-mode optical fiber and alleviating the bandwidth crisis in optic fiber communication systems in recent years. Nevertheless, traditional solid core few-mode optical fibers usually suffer from optical fiber nonlinearity and mode coupling, leading to mode crosstalk between channels. Hollow core negative curvature fibers (HC-NCF) have attracted widespread attention due to their advantages such as low latency, low nonlinearity, low dispersion, low transmission loss, and large operating bandwidth. In this work, a novel low-loss few-mode HC-NCF with symmetrically double ring nested tube structure is designed, which supports six core modes including LP 01 、LP 11 、LP 21 、LP 02 、LP 31a 、LP 31b . The designed optical fiber is based on silica dioxide substrate and adopts a unique symmetrical double ring nested cladding structure, which can effectively suppress the coupling between the core mode and the cladding mode. The finite element method (FDE) was used to numerically analyze the properties of the proposed few-mode HC-NCF and optimize the structural parameters of the few-mode HC-NCF. Moreover, the confinement loss and bending loss of all core modes were investigated. The simulation results show that the proposed few-mode HC-NCF can support the independent transmission of six weakly coupled core modes (with the effective refractive index difference greater than 1×10 -4 between the adjacent core modes, which greatly avoids the coupling between the adjacent modes in the fiber core). Within the 400 nm bandwidth (1.23-1.63 μm, covering the O, E, S, C, and L bands), all six modes in the fiber core maintain low loss transmission. Moreover, within the range of 1.3-1.63 μm, the CL of LP 01 , LP 11 and LP 21 modes is less than 1×10 -3 dB/m, and the CL of LP 02 and LP 31b modes is less than 3×10 -3 dB/m. The CL of each mode reached the lowest value at 1.4 μm, and the LP 01 mode has the lowest CL of 4.3×10 -7 dB/m. In addition, for a bending radius of 7 cm, each mode maintains the low bending loss characteristic over a certain operating wavelength range. Within the range of 1.23-1.61 μm, the BL of LP 01 is less than 4.5×10 -4 dB/m, and the BL of LP 11 is less than 1.3×10 -3 dB/m. The tolerance analysis shows that even with a structural parameters deviation of ±1%, the few-mode HC-NCF can still maintain the characteristic of low-loss and weak coupling. The designed few-mode HC-NCF has ultra-low CL and bending-insensitive characteristics, while supporting independent transmission of six modes, which will find huge application potential in the future high performance mode division multiplexing systems.

Concentric circular stress region-assisted pseudo-elliptical-ring-core polarization-maintaining few-mode fiber

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Design of 20-Polarization-maintaining-mode "Pseudo-Rectangle" Elliptical-Core Fiber for MIMO-less MDM Networks

Polarization-maintaining Fiber Composed of an Elliptical Ring Core and Two Circular Air Holes

Design of ring-core few-mode multi-core fiber with low crosstalk and low bending loss

Design of PANDA Ring-Core Fiber with 10 Polarization-Maintaining Modes

Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Low-loss weak-coupling 6-mode hollow-core negative curvature fiber based on symmetric double-ring nested tube

A Novel Three-Ring-core Few-Mode Fiber with Large Effective Area and Low Nonlinear Coefficient

Single-mode Annular Chirally-Coupled Core Fibers for Fiber Lasers

Single-mode operation in few-mode optical fibre based on resonant coupling

Design of weakly-coupled ultra-flattened dispersion few-mode photonic crystal fiber

Fourteen-core Dual-Mode Fiber with Low Bending Loss and Large Mode Area

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

A low crosstalk seven-core five-mode fiber for high density transmission and large capacity communication

A Weakly-Coupled Double Bow-Tie Multi-Ring Elliptical Core Multi-Mode Fiber for Mode Division Multiplexing across C+L+U Band

Low-loss, Single-Polarization, Anti-Bending Anti-Resonant Fiber Applicable to the Small Flexibility Field

Low-Loss 25.3 Km Few-Mode Ring-Core Fiber for Mode-Division Multiplexed Transmission

A weakly-coupled air-hole-bow-tie-assisted few-mode fiber for short-haul MDM across C + L band

Single-polarization single-mode double-ring hollow-core anti-resonant fiber