Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Design and fabrication of a tellurite hollow-core anti-resonant fiber for mid-infrared applications

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

Low-loss nodeless hollow-core anti-resonant soft glass fiber for the 4 μm mid-infrared spectral range

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Nested hollow-core anti-resonant fiber with elliptical cladding for 2 μm laser transmission

A simplified Mid-infrared anti-resonant chalcogenide fiber with fewest resonant peaks

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Design and Properties of Hollow Antiresonant Fibers for the Visible and Near Infrared Spectral Range

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

High birefringence, single-polarization, low loss hollow-core anti-resonant fibers

Tunable Acoustically-Induced Fiber Gratings Based on the Anti-Resonant Hollow-Core Fiber

A single-polarization hollow-core anti-resonant fiber based on epsilon-near-zero (ENZ) material in terahertz region

A Mid-Infrared Multifunctional Optical Device Based on Fiber Integrated Metasurfaces

Large mode-area all-solid anti-resonant fiber based on chalcogenide glass for mid-infrared transmission.

Design and Study of Low Loss, High Birefringence Quasi-Symmetric Hollow-Core Anti-Resonant Fiber

Mid-infrared all-fiber light-induced thermoelastic spectroscopy sensor based on hollow-core anti-resonant fiber

Watt-scale near-diffraction-limited mid-infrared laser delivery by a chalcogenide anti-resonant fiber

Novel Er3+/Ho3+‐codoped Glass‐ceramic Fibers for Broadband Tunable Mid‐infrared Fiber Lasers

Ultrafast Laser-Fabricated Fluoride Glass Waveguides with Exceptionally High Refractive Index Change for Mid-Infrared Integrated Optics