Abstract:Low-loss, high-birefringence, bend-resistant hollow-core anti-resonant fibers for infrared wavelengths have important applications in the fields of precision interferometric sensing, laser systems, and optical communications. In this paper, an eight-tube cladding quasi-symmetric hollow-core anti-resonant fiber is proposed, and two other anti-resonant fibers are designed based on this fiber structure. The finite element analysis method is used to numerically analyze the limiting loss, birefringence coefficient, bending resistance, and other properties of the three optical fibers after the optimized design. The results show that the limiting loss of the three optical fibers at λ = 1.55 μm is lower than 10−4 magnitude, and all of them obtain a birefringence coefficient of 10−4 magnitude; at the same time, the three optical fibers have their own characteristics and advantages, and the first optical fiber can reach a birefringence coefficient of 9.25 × 10−4 at λ = 1.52 μm.The limiting loss at λ = 1.55 μm is 3.42 × 10−5 dB/km. The minimum bending radius of the three types of anti-resonant fibers is less than 40 mm, which represents good bending characteristics, and the eight-tube cladding quasi-symmetric optical fiber has a bending loss of less than 2.10 × 10−3 dB/km when the bending radius is 28 mm. The three types of optical fibers have obtained good results in improving the mutual constraints between low limiting loss and high birefringence, with better results than the other two types. The obtained results have high development potential.

Design and Properties of Hollow Antiresonant Fibers for the Visible and Near Infrared Spectral Range

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Design and fabrication of a tellurite hollow-core anti-resonant fiber for mid-infrared applications

Design and Study of Low Loss, High Birefringence Quasi-Symmetric Hollow-Core Anti-Resonant Fiber

DESIGN AND FABRICATION OF INFRARED HOLLOW FIBERS FOR SPECTROSCOPIC GAS SENSING

Anti-Resonant Hollow-Core Fibers with High Birefringence and Low Loss for Terahertz Propagation

Birefringent anti-resonant hollow-core fiber

Design and analysis of Hollow-core fiber with anti-resonant structure for Ethylene detection

Antiresonant fiber-enhanced Raman spectroscopy gas sensing with 1 ppm sensitivity

Mid-Infrared Hollow-Core Bragg Fiber for Trace Gas Detection

Fabrication of mid-infrared hollow-core Bragg fiber and it application in gas sensing

Low-loss hollow-core silica fibers with adjacent nested anti-resonant tubes

Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Nested antiresonant nodeless hollow core fiber

Low-loss hollow-core fiber with stadium-shaped nested tubes for near-infrared communications

Tunable Acoustically-Induced Fiber Gratings Based on the Anti-Resonant Hollow-Core Fiber

Hollow-core fibers with reduced surface roughness and ultralow loss in the short-wavelength range

Suspended core subwavelength fibers: practical designs for the low-loss terahertz guidance

Selectively gas-filled anti-resonant hollow-core fibers for broadband high-purity LP11 mode guidance

Numerical modeling of a hybrid hollow-core fiber for enhanced mid-infrared guidance

Antiresonant Hollow-core Fiber with Ultralow Bending Loss