Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Anti-resonant Hollow Core Fiber with Excellent Bending Resistance in the Visible Spectral Range

Theoretical Analysis and Fabrication of a Nested Antiresonant Hollow-Core Fiber with Low Tight Bend Loss

Low Bending Loss Nodeless Hollow-core Anti-Resonant Fiber

Highly Birefringent Anti-Resonant Hollow-Core Fiber With a Low Loss

Single-mode bend-resistant hollow-core fiber with multi-size anti-resonant elements

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Low bending loss few-mode hollow-core anti-resonant fiber with glass-sheet conjoined nested tubes

Low loss polarization maintaining anti-resonant hollow core fiber

Hollow-core fiber for single-mode, low loss transmission of broadband UV light

Low Bending Loss Single-mode Hollow-core Anti-resonant Fiber with Multi-size Tubes

A Bend-Insensitive Hollow Anti-Resonant Fiber Design with Ultralow Loss

Ultralow Loss Hollow-Core Conjoined-Tube Negative-Curvature Fiber

Crescent-Shaped Anti-Resonant Hollow Core Fiber

Wideband Low Loss Bending-Resistance Hollow-Core Fiber with Hybrid Claddings of Antiresonance and Photonic Bandgap Guidance Mechanisms

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Ultra-low-loss Hollow-Core Bragg Antiresonant Fiber with Super Bandwidth Transmission Window

Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification.

Low loss nested hollow-core anti-resonant fiber at 2 µm spectral range.

Design of 2 μm Low-Loss Hollow-Core Anti-Resonant Fibers