Ultralow-loss Fusion Splicing between Antiresonant Hollow-core Fibers

Caoyuan Wang,Jie Zhu,Ruowei Yu,Zhende Zhai,Limin Xiao

DOI: https://doi.org/10.1109/ACP55869.2022.10089131

2022-01-01

Abstract:An ultralow loss (0.08 dB) fusion splice between antiresonant hollow-core fibers (AR-HCFs) is demonstrated, where the transmission property of AR-HCF does not change within a wide working wavelength range.

What problem does this paper attempt to address?

Low-loss Fusion Splicing between Antiresonant-HCFs and AR-coated SMFs with Low Return Loss

Caoyuan Wang,Ruowei Yu,Limin Xiao

DOI: https://doi.org/10.1109/ACP55869.2022.10089113

2022-01-01

Abstract:We have demonstrated a unique fiber splicing technique for low-loss fusion splicing between antiresonant hollow core fibers and standard single-mode fibers with AR coating, achieving an insertion loss of 0.3 dB per connection and return loss below -28 dB over a wide spectral range.
Ultralow-loss Fusion Splicing Between Antiresonant Hollow-Core Fibers and Antireflection-Coated Single-Mode Fibers with Low Return Loss

Caoyuan Wang,Ruowei Yu,Cong Xiong,Jie Zhu,Limin Xiao

DOI: https://doi.org/10.1364/ol.481190

IF: 3.6

2023-01-01

Optics Letters

Abstract:The Fresnel reflection of a splice from the air–silica interface between a hollow-core fiber (HCF) and a solid-core conventional fiber will increase the splicing loss and also cause possible instability of transmission. Here, for the first time, we develop a novel approach to fusion splicing an antireflection-coated (AR-coated) conventional fiber and an antiresonant HCF, which was generally claimed to be impossible because of the heat-induced damage of the coating, and achieve state-of-the-art ultralow fusion splicing loss less than 0.3 dB and a low return loss less than −28 dB by optimizing the splicing procedures and parameters. Our new fusion splicing approach will benefit the wide application of HCFs in telecoms, laser technologies, gyroscopes, and fiber gas cells.
Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Chen-ge Wang,Lei Wang,Xuan She,Nan Li,Kan Chen,Xiao-wu Shu

DOI: https://doi.org/10.1088/1555-6611/aaf98d

IF: 1.2

2019-01-01

Laser Physics

Abstract:This paper proposes a high strength and low loss splicing method suitable for coupling between hollow-core photonic crystal fiber and single mode fiber, based on filament fusion technology. The essence of this method is keeping the temperature of the single mode fiber above the melting temperature, and that of the hollow-core photonic crystal fiber at around the softening point temperature by modifying several splice parameters, which can be pre-evaluated by numerical simulation. Experimental results have verified the accuracy of the numerical model, and ideal splicing results can be made under proper splice parameters. In this paper, repeatable splicing between hollow-core photonic crystal fiber and single mode fiber with a loss of less than 2.3 dB, and a strength higher than 38 Kpsi is demonstrated.
Ultralow-Loss and Polarization-Maintained Fusion Splicing for Asymmetric Antiresonant Hollow-Core Fibers

Ruowei Yu,Jie Zhu,Caoyuan Wang,Cong Xiong,Limin Xiao

DOI: https://doi.org/10.1109/acp55869.2022.10088826

2022-01-01

Abstract:We develop an approach to tailoring the mode of a solid-core polarization-maintaining fiber, with both the reverse tapering process and the thermally expanded core technique, enlarging the mode area and reshaping the mode shape to construct a matched interface with an asymmetric antiresonant hollow-core fiber. An ultralow fusion splicing loss of 0.41 dB and a maintained polarization extinction ratio of 28 dB were demonstrated, with no additional intermediate component.
Splicing Optical Microfibers Via Polymer Nanowires

Zhifang Hu,Wei Li,Yaoguang Ma,Limin Tong

DOI: https://doi.org/10.1364/ol.37.004383

2012-01-01

Abstract:We demonstrate a general approach to splice microfibers via polymer nanowire. Mach-Zehnder interferometer assembled using this technique functions in air and water. The approach promises potential applications in micro-optics integration and sensing.
Ultralow-Loss Fusion Splicing Between Negative Curvature Hollow-Core Fibers And Conventional Smfs With A Reverse-Tapering Method

Caoyuan Wang,Ruowei Yu,Benoît Debord,Frédéric Gérôme,Fetah Benabid,Kin Seng Chiang,Limin Xiao

DOI: https://doi.org/10.1364/OE.432147

IF: 3.8

2021-01-01

Optics Express

Abstract:Negative curvature hollow-core fibers (NC-HCFs) can boost the excellent performance of HCFs in terms of propagation loss, nonlinearity, and latency, while retaining large core and delicate cladding structures, which makes them distinctly different from conventional fibers. Construction of low-loss all-fiber NC-HCF architecture with conventional single-mode fibers (SMFs) is important for various applications. Here we demonstrate an efficient and reliable fusion splicing method to achieve low-loss connection between a NC-HCF and a conventional SMF. By controlling the mode-field profile of the SMF with a two-step reverse-tapering method, we realize a record-low insertion loss of 0.88 dB for a SMF/NC-HCF/SMF chain at 1310 nm. Our method is simple, effective, and reliable, compared with those methods that rely on intermediate bridging elements, such as graded-index fibers, and can greatly facilitate the integration of NC-HCFs and promote more advanced applications with such fibers. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Jie Zhu,Caoyuan Wang,Ruowei Yu,Ye Wang,Zhende Zhai,Limin Xiao

DOI: https://doi.org/10.1109/acp55869.2022.10088758

2022-01-01

Abstract:We have fabricated a 0.8-km long high performance antiresonant hollow-core fiber (AR-HCF) with a transmission attenuation of ~12 dB/km. And its bending loss behavior has been investigated theoretically and experimentally. The fabricated AR-HCF exhibits an outstanding anti-bending performance in wide wavelength range from 1300 nm to 1750 nm, and an ultralow bending loss @ 1612nm ≤10 dB/km at a bend radius of 1.6 cm is obtained.
Fusion Spliced Microfiber Closed-Loop Resonators

Pan Wang,Lei Zhang,Zongyin Yang,Fuxing Gu,Shanshan Wang,Qing Yang,Limin Tong

DOI: https://doi.org/10.1109/lpt.2010.2049646

IF: 2.6

2010-01-01

IEEE Photonics Technology Letters

Abstract:Based on low-loss fusion splicing of microfibers using a CO laser, we demonstrate free-standing microfiber closed-loop resonators. Loaded Q-factors of 110 500 with a finesse of 15.3 are obtained around 1.5-mu m wavelength in a 2.4-mm-diameter closed-loop resonator suspended in air. The possibility of tuning resonant responses by changing the coupling efficiency is also demonstrated.
Fusion Splicing Soft Glass Microfibers for Photonic Devices

Wei Li,Pan Wang,Zhifang Hu,Limin Tong

DOI: https://doi.org/10.1109/lpt.2011.2140369

IF: 2.6

2011-01-01

IEEE Photonics Technology Letters

Abstract:We report fusion splicing nonsilica soft glass microfibers by using single pulses from a CO(2) laser. Splice loss of a 2-mu m-diameter phosphate glass microfiber is around 0.2 dB. By fusion splicing phosphate glass microfibers into closed-loop rings, we demonstrate a microfiber resonator with a Q-factor of about 25 000 and a 1.5-mu m-wavelength microring laser with a linewidth of about 0.05 nm. Our results suggest a potential approach to fabricating robust and versatile photonic components or devices out of soft glass microfibers that are excellent hosts for a variety of functional dopants.
Low-loss multi-mode anti-resonant hollow-core fibers

Dakun Wu,Fei Yu,Cheng Wu,Jinhu Zheng,Lili Hu,Jonathan Knight,Meng Zhao

DOI: https://doi.org/10.1364/OE.492787

IF: 3.8

2023-06-15

Optics Express

Abstract:Dakun Wu, Fei Yu, Cheng Wu, Meng Zhao, Jinhu Zheng, Lili Hu, Jonathan Knight In this work, multi-mode anti-resonant hollow-core fiber (AR-HCF) with 18 fan-shaped resonators is fabricated and characterized. The ratio ... [Opt. Express 31, 21870-21880 (2023)]

optics
Splicing Hollow-Core Fiber with Standard Glass-Core Fiber with Ultralow Back-Reflection and Low Coupling Loss

Bo Shi,Cong Zhang,Thomas Kelly,Xuhao Wei,Meng Ding,Meng Huang,Songnian Fu,Francesco Poletti,Radan Slavík

DOI: https://doi.org/10.1021/acsphotonics.4c00677

IF: 7

2024-08-27

ACS Photonics

Abstract:A main, yet-unsolved challenge in splicing hollow-core fiber (HCF) into standard single-mode fiber (SMF) systems lies in managing the strong Fresnel back-reflection that occurs when the light travels from the empty core of the HCF into the glass core of the SMF or vice versa. This impacts the performance of fiber systems that combine SMFs and HCFs due to effects such as multipath interference. Here, we demonstrate a new technique that combines angle-cleaving the HCF, which reduces the...

physics, condensed matter,optics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Low-loss fusion splicing between spacing-mismatched multicore fibers

Wei Ji,Ruowei Yu,Zihao Shen,Caoyuan Wang,Cong Xiong,Limin Xiao

DOI: https://doi.org/10.1364/ol.447602

IF: 3.6

2021-01-01

Optics Letters

Abstract:Multicore fibers (MCFs) offer a fascinating solution to the need to increase the fiber density and thus meet the exponentially growing demand for capacity in optical communication networks. Despite overwhelming research into MCFs, the desire for a general fusion splicing scheme between dissimilar MCFs remains unanswered. Here, we propose a tapering technique to reshape MCFs that includes both reverse-tapering and down-tapering schemes and can be exploited to tailor the core-to-core spacing and modify the modal property of MCFs. By matching both the spacing and the mode field diameter, we demonstrated a low-loss (0.18 +/- 0.10 dB) and low-crosstalk (-68 +/- 3 dB) fusion splice between two spacing-mismatched MCFs with a spacing difference of up to 26 mu m. The proposed novel schemes are also suitable for splicing between MCFs with slightly different spacings and can provide a unique perspective for fabricating MCF devices and boosting various MCF applications. (C) 2021 Optica Publishing Group
High birefringence, single-polarization, low loss hollow-core anti-resonant fibers

Xingtao Zhao,Jingliang Xiang,Xuanrui Wu,Zhiwei Li

DOI: https://doi.org/10.1364/OE.439550

IF: 3.8

2021-10-21

Optics Express

Abstract:Xingtao Zhao, Jingliang Xiang, Xuanrui Wu, Zhiwei Li We present a novel hollow-core anti-resonant fiber (HC-ARF) with a cladding ring, two nested resonant tubes and two nested silicon tubes. ... [Opt. Express 29, 36273-36286 (2021)]

optics
Low-loss Splicing Small-Core Photonic Crystal Fibers and Single-Mode Fibers by Repeated Arc Discharges

Limin Xiao,Wei Jin,M. S. Demokan

DOI: https://doi.org/10.1109/qels.2007.4431323

IF: 3.6

2006-01-01

Optics Letters

Abstract:We demonstrated low-loss splicing small-core photonic crystal fibers (PCFs) and single-mode fibers by repeated arc discharges applied over the splicing joint to gradually collapse the air holes of the small-core PCF.
Fusion Splicing of Silica Hollow Core Anti-Resonant Fibers With Polarization Maintaining Fibers

Yucheng Min,Adam Filipkowski,Grzegorz Stpniewski,Dominik Dobrakowski,Jian Zhou,Bowen Lou,Mariusz Klimczak,Luming Zhao,Ryszard Buczyski,Grzegorz Stepniewski,Ryszard Buczynski

DOI: https://doi.org/10.1109/jlt.2021.3058888

IF: 4.7

2021-05-15

Journal of Lightwave Technology

Abstract:Yucheng Min, Adam Filipkowski, Grzegorz Stępniewski, Dominik Dobrakowski, Jian Zhou, Bowen Lou, Mariusz Klimczak, Luming Zhao, Ryszard Buczyński<br/>Fusion splicing of solid-core microstructured silica fibers has been one of the key enablers which opened practical applications of these ... [J. Lightwave Technol. 39, 3251-3259 (2021)]

engineering, electrical & electronic,optics,telecommunications
Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Wei Ding,Ying-Ying Wang,Shou-Fei Gao,Meng-Ling Wang,Pu Wang

DOI: https://doi.org/10.1109/jstqe.2019.2957445

IF: 4.9

2020-07-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:In the research field of hollow-core optical fiber (HCF), one type of fiber geometry with a leaky mode nature has unexpectedly taken center stage over the last couple of years: the so-called hollow-core anti-resonant fiber (ARF). The guidance mechanism of this ARF has been elucidated explicitly, the optical performance of the fiber has improved significantly, and the range of potential fiber application areas has expanded steadily. This paper will review our continuous efforts to understand, design, and fabricate this hollow-core ARF with the aim of lower loss and wider bandwidth. We also explore the possibility of using an advanced form of ARF in communications applications. In the long journey of looking for optical fibers that provide better performance than conventional solid-core glass fibers, exploitation of the hidden potential of artificial photonic micro-structures will continue to advance.

engineering, electrical & electronic,optics,physics, applied,quantum science & technology
Double-end low-loss coupling of anti-resonant hollow-core fibers with solid-core single-mode fibers by tapering technique

Hao Li,Wei Huang,Zefeng Wang,Zhiyue Zhou,Yulong Cui,Zhixian Li,Xiaoming Xi

DOI: https://doi.org/10.1088/1612-202X/abae6b

IF: 1.704

2020-09-09

Laser Physics Letters

Abstract:We report here the low-loss double-end coupling of an anti-resonant hollow-core fiber (AR-HCF) with a solid-core single-mode fiber by the fiber tapering technique for the first time. The double-end coupling model is established by the beam propagation method, and the various influences, such as those of insertion depth, tapered waist offset, tapered waist bending, etc, on the coupling efficiency are simulated in detail. Results show that the coupling efficiency can be optimized by choosing proper waist diameters of the tapered solid-core fibers at both ends; meanwhile, the output taped fiber must be inserted into the proper depth. The calculated maximum coupling efficiency is 70.8% for AR-HCF of the core diameter 46 μ m at the 1.5 μ m band, and the measured value is ~52.3%, which is hoped to be further increased by improving the performance of the tapered fibers and the coupling system. This work opens new opportunities for all-fiber structured gas lasers, which is very significant for its future applications.

optics,physics, applied
Highly Birefringent Anti-Resonant Hollow-Core Fiber With a Low Loss

Menghan Ma,Kan Chen,Yuhao Ma,Ran Bi,Xuan She,Xiaowu Shu

DOI: https://doi.org/10.1109/lpt.2023.3300306

IF: 2.6

2023-08-12

IEEE Photonics Technology Letters

Abstract:In recent years, anti-resonant hollow-core fibers (known as AR-HCFs) have gradually become one of the research hotspots. However, their loss and birefringence properties are often difficult to reconcile. In this letter, a new structure of AR-HCF is proposed by analyzing the factors that affect their loss and birefringence. The fiber features a negative curvature core surround, double-layer structures, and two half-tubes containing nested tubes. Based on COMSOL Multiphysics, the designed AR-HCF has a high birefringence of and a low confinement loss of 6.1 dB km−1 at 1550 nm, a bandwidth of 40 nm, bending resistance and single-mode operation.

engineering, electrical & electronic,optics,physics, applied
More than threefold expansion of highly nonlinear photonic crystal fiber cores for low-loss fusion splicing.

Z Chen,C Xiong,L M Xiao,W J Wadsworth,T A Birks

DOI: https://doi.org/10.1364/OL.34.002240

IF: 3.6

2009-01-01

Optics Letters

Abstract:We have formed low-loss fusion splices from highly nonlinear (HNL) photonic crystal fibers (PCFs) with small cores and high air-filling fractions to fibers with much larger mode field diameters (MFDs). The PCF core was locally enlarged by the controlled collapse of holes around the core while keeping other holes open. The fiber was then cleaved at the enlarged core and spliced to the large MFD fiber with a conventional electric arc fusion splicer. Splice losses as low as 0.36 dB were achieved between a PCF and a standard single-mode fiber (SMF) with MFDs of 1.8 mu m and 5.9 mu m, respectively. (c) 2009 Optical Society of America
Low Loss Splicing Experiment of High Nonlinearity Photonic Crystal Fiber and Single Mode Fiber

Wei ZHANG,Lei ZHANG,Shi CHEN,Qing CAI,Yi-dong HUANG,Jiang-de PENG

DOI: https://doi.org/10.3321/j.issn:0258-7025.2006.10.019

2006-01-01

Abstract:Theoretical and experimental investigations on the splicing loss mechanism of high nonlinearity photonic crystal fiber (PCF) and single mode fiber (SMF) at 1550 nm point out that mismatching of the mode field of these two kind fibers is the main cause of the splicing loss. And the air hole collapse due to long fusion time and large fusion current results in a large additional loss over 10 dB. An intermediate fiber is used to achieve the mode field matching. And optimized parameters are used to avoid air hole collapse during the arc fusion splice. The total splicing loss can be reduced to < 1 dB.

Ultralow-loss Fusion Splicing between Antiresonant Hollow-core Fibers

Low-loss Fusion Splicing between Antiresonant-HCFs and AR-coated SMFs with Low Return Loss

Ultralow-loss Fusion Splicing Between Antiresonant Hollow-Core Fibers and Antireflection-Coated Single-Mode Fibers with Low Return Loss

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Ultralow-Loss and Polarization-Maintained Fusion Splicing for Asymmetric Antiresonant Hollow-Core Fibers

Splicing Optical Microfibers Via Polymer Nanowires

Ultralow-Loss Fusion Splicing Between Negative Curvature Hollow-Core Fibers And Conventional Smfs With A Reverse-Tapering Method

Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Fusion Spliced Microfiber Closed-Loop Resonators

Fusion Splicing Soft Glass Microfibers for Photonic Devices

Low-loss multi-mode anti-resonant hollow-core fibers

Splicing Hollow-Core Fiber with Standard Glass-Core Fiber with Ultralow Back-Reflection and Low Coupling Loss

Low-loss fusion splicing between spacing-mismatched multicore fibers

High birefringence, single-polarization, low loss hollow-core anti-resonant fibers

Low-loss Splicing Small-Core Photonic Crystal Fibers and Single-Mode Fibers by Repeated Arc Discharges

Fusion Splicing of Silica Hollow Core Anti-Resonant Fibers With Polarization Maintaining Fibers

Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Double-end low-loss coupling of anti-resonant hollow-core fibers with solid-core single-mode fibers by tapering technique

Highly Birefringent Anti-Resonant Hollow-Core Fiber With a Low Loss

More than threefold expansion of highly nonlinear photonic crystal fiber cores for low-loss fusion splicing.

Low Loss Splicing Experiment of High Nonlinearity Photonic Crystal Fiber and Single Mode Fiber