Abstract:We demonstrate a low-loss, repeatable, and robust splice between single-mode silica fiber and single-mode chalcogenide (CHG) fiber. These splices are particularly difficult to create because of the significant difference in the two fibers' glass transition temperatures (∼1000°C) as well as the large difference in the coefficients of thermal expansion between the fibers (∼20×10(-6)/°C). With 90% light coupled through the silica-CHG fiber splice, predominantly in the fundamental circular-symmetric mode, into the core of the CHG fiber and with 0.5 dB of splice loss measured around the wavelength of 2.5 μm, after correcting only for the Fresnel loss, the silica-CHG splice offers excellent beam quality and coupling efficiency. The tensile strength of the splice is greater than 12 kpsi, and the laser damage threshold is greater than 2 W (CW) and was limited by the available laser pump power. We also utilized this splicing technique to demonstrate 2 to 4.5 μm ultrabroadband supercontinuum generation in a monolithic all-fiber system comprising a CHG fiber and a high peak power 2 μm pulsed Raman-shifted thulium fiber laser. This is a major development toward compact form factor commercial applications of soft-glass mid-IR fibers.

Fusion Splicing Soft Glass Microfibers for Photonic Devices

Splicing Optical Microfibers Via Polymer Nanowires

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Fusion Spliced Microfiber Closed-Loop Resonators

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Low-loss, robust fusion splicing of silica to chalcogenide fiber for integrated mid-infrared laser technology development

High-Efficiency Fusion Splicing Of Mid-Infrared Special Fibers With The Silica Fibers

Fusion Splicing Small-Core Photonic Crystal Fibers and Single-Mode Fibers by Controlled Air Hole Collapse

Pressure-Assisted Low-Loss Fusion Splicing Between Photonic Crystal Fibers And Single-Mode Fiber

Fusion Spliced Microfiber Ring Resonators

Fusion Splicing Photonic Crystal Fibers and Conventional Single-Mode Fibers: Microhole Collapse Effect

Ultralow-loss Fusion Splicing Between Antiresonant Hollow-Core Fibers and Antireflection-Coated Single-Mode Fibers with Low Return Loss

Fiber to Chip Fusion Splicing for Robust, Low Loss Photonic Packaging

Pressure-assisted low-loss fusion splicing between photonic crystal fiber and single-mode fiber.

More than threefold expansion of highly nonlinear photonic crystal fiber cores for low-loss fusion splicing.

Fusion Splicing Experiments of 1060-XP Silica Fiber with Phosphate Glass Fiber

Fusion Splicing of Silica Hollow Core Anti-Resonant Fibers With Polarization Maintaining Fibers

Coupling and Fusion Splicing of Photonic Crystal Fibers with Conventional Fibers

Fusion splicing between photonic crystal fibers and the loss analysis