Abstract:Phase shifts within microfiber resonators can be exploited to demonstrate compact and fast-responding devices. Two examples, a sensor and a bistable device, where the origins of the phase shift are fundamentally different, are investigated. In the sensor the phase change originates from the change of refractive index of the medium surrounding the microfiber ring. This is a linear mechanism which translates into a change of resonance wavelength. Calculations of a silica microfiber ring immersed in an aqueous solution and operating at a wavelength of 1550 nm show that with a fiber 550 nm in diameter the sensitivity approaches a maximal value of about 1137 nm/RIU. In contrast to the sensitivity, the detection limit is critically dependent on the Q factor of the microfiber resonator, and with state of the art microfiber resonators we predict a detection limit of the order of 10(-7) RIU. In the bistable device the phase shift is assumed to originate from the nonlinear optical Kerr effect. In contrast to the sensor, the nonlinearity affects the shapes of the resonances, a phenomenon responsible for bistability. Analytical formulae are derived to evaluate the main parameters at play. We investigate the suitability of several glass materials to realize a microfiber bistable device in air operating at a wavelength of 1550 nm. While the threshold for bistability is predicted to be of the order of tens of watts for silica, it drops to less than 30 mW for G2S2, an easily processed chalcogenide glass.

Fusion Spliced Microfiber Ring Resonators

Microfiber Resonator in Polymer Matrix.

Fusion Spliced Microfiber Closed-Loop Resonators

Microfiber Resonators in the Linear and the Nonlinear Regimes

Modeling Rare-Earth Doped Microfiber Ring Lasers

All-Fiber Fabry-Perot Resonators Based on Microfiber Sagnac Loop Mirrors

Theoretical study of microfiber resonator devices exploiting a phase shift

Enhanced Fast Light In Microfiber Ring Resonator With A Sagnac Loop Reflector

Effect Of Host Polymer On Microfiber Resonator

All-fiber Add-Drop Filters Based on Microfiber Knot Resonators.

Microfiber Knot Dye Laser Based on the Evanescent-Wave-Coupled Gain

Fusion Splicing Soft Glass Microfibers for Photonic Devices

A Tunable All-Fiber Filter Based on Microfiber Loop Resonator

Ultra-Low-Loss Spliceless Fiber Ring Resonators for Resonant Micro-Optic Gyroscopes

Fabrication of Microresonators of High Q/V Ratios Using Femtosecond Laser Micromachining

Concentric Silicon Micro-Ring Resonators with Enhanced Transmission Notch Depth

Demonstration of Optical Microfiber Knot Resonators

Nanofiber-segment ring resonator

Integrated Fabry-Perot cavities as a mechanism for enhancing micro-ring resonator performance

A Reflective Whispering Gallery Mode Microsphere Resonator Integrated With a Thick-Wall Capillary Tube

High Finesse Microfiber Knot Resonators Made from Double-Ended Tapered Fibers.