Abstract:We demonstrated remarkably enhanced 2.7 mu m emission in glass-ceramic (GC) fibers containing NaYF4: Er3+ nanocrystals with 980 nm excitation for the first time. The melt-in-tube technique is of scientific and technical significance for the fabrication of GC fibers in comparison to the conventional rod-in-tube technique. The obtained precursor fibers, in which the structure can be maintained well, exhibit no obvious element diffusion or crystallization during the fiber-drawing process. After a careful heat treatment, NaYF4 nanocrystals were controllably precipitated in the glass fiber core. Owing to the incorporation of Er3+ ions into the low phonon energy NaYF4 nanocrystals, enhanced 2.7 mu m emission was achieved from the Er3+-doped GC fibers, which was almost undetectable in precursor fibers due to the high phonon energy of the borosilicate glass fiber matrix. Moreover, the 2.7 mm emission lifetime was obtained due to the excellent emission properties of Er3+ in the GC fibers. The transmission loss values of precursor fibers and GC fibers at 1310 nm were measured to be 7.44 dB m(-1) and 11.81 dB m(-1), respectively. In addition, a theoretical simulation based on the rate equations and propagation equations was performed to evaluate the possibility of 2.7 mu m laser output. The excellent optical properties endow the GC fibers with potential applications for mid-infrared fiber lasers.

Ag Nanoparticles Embedded Er3+/Yb3+ Co-Doped Phosphate Glass Single-Mode Fibers

Low-Threshold Microlaser in Er : Yb Phosphate Glass Coated Microsphere

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

Characterization of sub-nanosecond pulsed laser amplification with Er:Yb co-doped phosphate glass fibers

Upconversion of 1.064 Μm Nd:YAG Laser Pulses into Intense Visible Light in Erbium-Doped Phosphate Fibers

Optical properties of Er3+/Yb3+ co-doped phosphate glass system for NIR lasers and fiber amplifiers

Effective enhanced 3.1 μm mid-infrared emission of Er3+/Yb3+ co-doped tellurite glasses introduced Ag nanoparticles

Short-length High-Gain ASE Fiber Laser at 1.54-Μm by High-Codoped Erbium and Ytterbium Phosphate Laser Glasses

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

Enhanced single-mode fiber laser emission by nano-crystallization of oxyfluoride glass-ceramic cores

In-Situ Grown Erbium-Doped Dielectric Nanoparticles in Silica-Based Transparent Optical Fibers

Er3+/Yb3+ Co-Doped Fluorotellurite Glass Fiber with Broadband Luminescence

Fluorescence and Attenuation Properties of Er 3+ -Doped Phosphate-Glass Fibers and Efficient Infrared-to-visible Up-Conversion

Properties of Er3+-doped phosphate glasses and glass fibres and efficient infrared to visible upconversion

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Yb-Doped Aluminophosphosilicate Laser Fiber

Nd-doped phosphate glass microstructured optical fiber laser

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

Efficient and Broadband Emission in Dy3+-Doped Glass-Ceramic Fibers for Tunable Yellow Fiber Laser

Fabrication and Characterization of Er~(3+):Yb~(3+) Co-doped Phosphosilicate Fibers