Abstract:This paper reports an advanced deep reactive ion etching (DRIE) process for realizing ultra-deep (>500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>) and ultra-high aspect-ratio (UHAR) silicon structures (AR > 40 for 1-mm through-trench etch, <inline-formula> <tex-math notation="LaTeX">$\text {AR}\approx 80$ </tex-math></inline-formula> for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-trench etch, and AR > 20 for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-hole etch), with straight sidewalls across a wide range of feature sizes. The challenges of making such structures are overcome by continuously ramping critical parameters of the Bosch DRIE process throughout the process, including the 380-kHz bias power during etch step, the etch/passivation step duration, and the chamber pressure. The masking material capable of enduring the long DRIE process is also discussed; 10-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> wide trenches are etched to a depth of >750-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and >1000-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, respectively, in 1-mm-thick silicon wafers with straight sidewall profiles and flat trench bottoms. Deeper trenches are expected to be etched beyond a 1-mm thick wafer with thicker and/or higher selectivity masking materials. We have also demonstrated etching of circular holes of diameters as small as 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> to a depth of >500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, and potentially with 10–15 <inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> diameter holes. This advanced DRIE process offers opportunities for applications ranging from through-silicon via in 3-D CMOS integration to emerging micro- and meso-scale microelectromechanical system applications that demand ultra-deep and UHAR DRIE. [2017–0298]

Inverse RIE Micro-Loading in Deep Etching of Silicon Via Array

Transmission of refractive microlens array by reactive ion beam etching

Reactive ion beam etching for diffractive optical elements

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Improvement on the Uniformity of Deep Reactive Ion Etch for Electrically Isolated Silicon-Based Substrates

Three-Dimensional Simulation of DRIE Process Based on the Narrow Band Level Set and Monte Carlo Method

Modeling and Simulation of Silicon Dry Etching

Ultra Deep Reactive Ion Etching of High Aspect-Ratio and Thick Silicon Using a Ramped-Parameter Process

3D Simulation of Profile Evolution in Silicon DRIE

Ultra high aspect-ratio and thick deep silicon etching (UDRIE)

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

Three step deep reactive ion etch for high density trench etching

Flow-restricted Etching Method on Isotropic Substrates and Its Mechanism

Recent Advances in Reactive Ion Etching and Applications of High-Aspect-Ratio Microfabrication

Flux based modeling and simulation of dry etching for fabrication of silicon deep trench structures

Micro Etching Method Inside Microchannels

RIE of SiO_2 Nanoparticles and Its Application in Preparation of Silicon Nanopillar Array

Deep Reactive Ion Etching As A Tool for Nanostructure Fabrication

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Deep-reactive ion etching of silicon nanowire arrays at cryogenic temperatures

Critical tasks in high aspect ratio silicon dry etching for microelectromechanical systems