Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Experimental and Numerical Investigation of Curve Section Stringer/skin Runout Under Tensile Load

Study on Modeling Method for Failure of a Warren Structure under Whirligig Impact Load

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Failure Mechanism Study on Omega Stringer Debonding

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Investigation into the Failure of Aircraft Stringer–skin Composite Structure under Bending Load

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

Dynamic Tensile Behavior of Fiber Reinforced Materials Based on Fiber Layering Modeling

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Interface fracture progression of composite T-stiffened skins fabricated by co-bonding and co-curing under tensile loading: an experimental investigation

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Multiscale Progressive Failure Analysis for Composite Stringers Subjected to Compressive Load

Experimental Study on Carbon Fiber/epoxy Laminates under Dynamic Tensile and Their Damage Analysis

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties