Abstract:This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood's anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device's original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/ nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device's performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device. (C) 2015 Optical Society of America

Analysis for an Improved Nanomechanical Microcantilever Sensor on Optical Waveguides

Mechanical and Electronic Approaches to Improve the Sensitivity of Microcantilever Sensors.

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Fabrication and characterization of SiO2 microcantilever for microsensor application

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

Optical Waveguide Sensors Based On Vernier Effect

Experimental Investigation of Waveguide Sensor Based on Cascaded-Microring Resonators with Vernier Effect

A Reflective Grating Microcantilever Biosensor

Cantilevered microfiber Bragg Grating sensor with high ultrasonic sensitivity and designable resonant frequency

A Grating-Based Optical Readout Method for Microcantilever Biosensor

Quasi-linear response of an integrated optical waveguide sensor by a double output readout method

A Novel Optical Fiber Reflective Read out Microcantilever Biosensor

Optical Readout Method for Microcantilever Array Sensing and Its Sensitivity Analysis.

Numerical analysis of effective refractive index ultrasonic sensor based on Cantilever arm structure slot-based dual-micro-ring resonator

Performances and Improvement of Coupled Dual-Microcantilevers in Sensitivity

Microfiber Bragg Grating Bonded Using Tapered Cantilever for High-Sensitivity Ultrasonic Detection

A Grating Microcantilever Biosensor Based on Diffraction Spectrum Feedback Balanced

Design and characterization of high-sensitivity cantilevers

Sensitivity Enhancement in Si Nanophotonic Waveguides Used for Refractive Index Sensing

A Reflective Mirror Microcantilevers-Based Biosensor for Biochemical Detection