Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

Performances and Improvement of Coupled Dual-Microcantilevers in Sensitivity

Mechanical and Electronic Approaches to Improve the Sensitivity of Microcantilever Sensors.

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Ultrasensitive mass detection using dual-microcantilevers coupled by cruciform overhang

Ultrasensitive Mass Sensor Using the Out-of-phase Vibration Eigenstate of Intercoupled Dual-Microcantilevers

Ultrasensitive charge detection utilizing coupled nonlinear micromechanical resonators

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Net-overhang Coupled Microcantilevers for Sensitive Mass Detection

Simulation of SiO2-based Piezoresistive Microcantilevers

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A Mass Sensing Technology Based on a Dynamic Microcantilever in Liquid

Modified Coefficient of Equivalent Mass to Explain Decreased Relative Sensitivity of Piezoelectric Cantilever Humidity Sensor in High Mode

Design of High-Sensitivity Cantilever and Its Monolithic Integration with CMOS Circuits

A Micro Resonant Charge Sensor with Enhanced Sensitivity Based on Differential Sensing Scheme and Leverage Mechanisms

Dual Waveguide Coupled Microring Resonator Sensor Based on Intensity Detection

Design and characterization of high-sensitivity cantilevers

Principle and Simulation of Microresonating Cantilever Sensor Based on Third Harmonic Detection

Chemical and Biological Sensors Based on Microcantilever Structure

Coupling Influence on the Sensitivity of Microfiber Resonator Sensors

Intermodal coupling spectroscopy of mechanical modes in microcantilevers

Tuning the quality factor of microcantilever using hydrodynamic coupling of micro structures