Abstract:Fiber Bragg grating (FBG) sensors play an increasingly important role in structural health monitoring, and tilt sensors are one of the most commonly used among them. Traditional FBG tilt sensors are easily affected by external vibration, and to overcome such a problem, this work proposes a novel FBG tilt sensor with a vibration damping feature. Based on the classical equal strength beam structure, a vibration-isolating spring is used as the vibration-damping connection between the beam and the mass block, while a damping fluid is filled inside the sensor housing as the vibration-damping material. After elaborating on the details of sensor structural design and measurement theory, five sensors were set up for relevant performance tests, and the controlled experiments were carried out for the FBG sensors with and without the vibration isolation springs. Meanwhile, for sensors with vibration isolation springs, the viscosity of filled damping fluid was also varied in the experiments, to better reveal its influence on the sensor performance. The experimental results show that the proposed sensors have a high sensitivity of 112.743 pm/° within a range of ±15° and also have superior creep resistance as well as good temperature compensation capability. From controlled experiments, it is evident that the proposed sensor with a vibration damping structure offers better vibration stability and monitoring accuracy and can be effectively adapted to safety monitoring tasks in different engineering applications by simply adjusting the viscosity of filled damping fluid.

Microfiber Bragg Grating Bonded Using Tapered Cantilever for High-Sensitivity Ultrasonic Detection

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Cantilevered microfiber Bragg Grating sensor with high ultrasonic sensitivity and designable resonant frequency

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Ultra-small Microfiber Bragg Grating Force Sensor with Greater Sensitivity

Ultra-highly Sensitive Surface-Corrugated Microfiber Bragg Grating Force Sensor

Sense High Refractive Index Sensitivity with Bragg Grating and MIM Nanocavity

D-Shaped Fiber Bragg Grating Ultrasonic Hydrophone With Enhanced Sensitivity and Bandwidth

Bragg Grating Chemical Sensor with Hydrogel As Sensitive Element

A Fiber Bragg Grating Sensing-Based Micro-Vibration Sensor and Its Application

A chirped long period fiber grating sensor based on micro-helix taper

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

Cantilever optical vibrometer using fiber Bragg grating

Microfiber-Based Bragg Gratings for Sensing Applications: A Review

Microfiber-based Bragg gratings for sensing applications: a review.

A novel fiber Bragg grating vibration sensor with double equal-strength cantilever beams

Sub-Nanometer Acoustic Vibration Sensing Using a Tapered-Tip Optical Fiber Microcantilever

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Design and Investigation of a Fiber Bragg Grating Tilt Sensor With Vibration Damping