Abstract:Further experiments are conducted in this study using a different chemical etchant, namely, HF + HNO3 + CH3COOH, with slight modifications in temperature. The chemicals used are HF + HNO3 + CH3COOH at temperatures of 50 °C and room temperature, with etching time durations of 2, 5, 10, and 15 min, respectively. Finally, an ultralow reflectivity of below 2% is achieved after a 5 min etching duration using the chemical etchant HF + HNO3 + CH3COOH at 50 °C on the mc‐silicon wafer. This study proposes a method to enhance the efficiency and optical properties of silicon solar cells made from as‐cut boron‐doped p‐type multicrystalline silicon (mi‐Si) wafers through acid‐based chemical texturization. Achieving lower reflectance is crucial for improving solar cell efficiency, and this can be attained through optimized chemical etching. The research demonstrates achieving a reflectance below 2% on the wafer surface after optimal chemical etching. Wet chemical etching is employed as the surface treatment method, using the same chemical etchant with varying conditions for the texturing process. The study compares temperature‐maintained chemical etching and without temperature maintenance. The chemicals used include HF + HNO3 + CH3COOH at temperatures of 50 °C and room temperature, with etching durations of 2, 5, 10, and 15 minutes, respectively. The as‐cut boron‐doped p‐type mc‐Si wafer grains are analyzed using UV‐vis spectroscopy, optical microscopy, Fourier transform infrared spectroscopy, thickness profilometry, scanning electron microscopy, and X‐ray diffraction spectroscopy, both before and after etching. Among the different conditions tested, the chemical etchant HF + HNO3 + CH3COOH at 50 °C for a 5‐minute etching duration yields favorable results, with reflectivity below 2%. The orientation of mc‐silicon wafer grains is determined using X‐ray diffraction spectroscopy.

Highly Efficient and Less Time Consuming Additive Free Anisotropic Etching of Silicon Wafers for Photovoltaics

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Rapid anisotropic chemical etching for quick formation of novel octagonal pyramids on silicon surface for photovoltaics

Ultra-Thin Silicon Wafers Fabrication and Inverted Pyramid Texturing Based on Cu-Catalyzed Chemical Etching

Reflectivity of porous-pyramids structured silicon surface

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Nano-Texturing of Single Crystalline Silicon Via Cu-Catalyzed Chemical Etching

Recent Frontiers in Anisotropic Wet Chemical Etching Techniques for Precision Surface Modification of Industrial-Grade Bulk Crystalline Silicon Wafers: Enhancing Performance in Photovoltaics and MEMS Devices

Effect of Additives on Making Texture Surface on Multicrystalline Silicon Wafer by Diamond Wire Sawing

A Simple Texturization Approach for Mono-Crystalline Silicon Solar Cell with Low Tmah Concentration Solution

An Innovative Light Trapping Structure Fabrication Method on Diamond-Wire-Sawing Multi-Crystalline Silicon Wafers

One-step Cu-assisted chemical etching at room temperature of inverted pyramid array for high-performance crystalline silicon solar cells

Two Scale Roughness, Self-Cleaning, and Low Reflectivity Silicon Surface for Solar Cell Applications

Comprehensive Study of Sf6/O-2 Plasma Etching for Mc-Silicon Solar Cells

Cu-assisted Chemical Etching of Diamond Wire Sawn Multicrystalline Silicon Wafers for Texturing

Nano-Texturing of Silicon Wafers Via One-Step Copper-Assisted Chemical Etching

Simple Smoothing of the Bottom Silicon Surface Using Wet Chemical Etching Methods for Epitaxial III‐V/Silicon Tandem Manufacturing

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

High-Efficient Solar Cells Textured by Cu/Ag-Cocatalyzed Chemical Etching on Diamond Wire Sawing Multicrystalline Silicon

Influence of Temperature on Acid‐Based Wet Chemical Texturization for Ultralow Optical Reflectance (<2%) of mc‐Si Wafer for PV Applications