Abstract:Ultra-thin silicon slicing technology plays a critical role in achieving high-efficiency and low-cost solar cells in the photovoltaic (PV) industry. However, the surface phase evolution of silicon wafers under an ultra-thin slicing process and resulting etching behavior remains unclear. In this study, the surface phase evolution of different surface thicknesses of silicon wafers was carefully studied. As the thickness of silicon wafers became relatively thin, the degree of surface stress-induced amorphous silicon (ST-α-Si) significantly increased. Moreover, the UPS test showed that the ST-α-Si layer had an orbital energy level relatively lower than that in monocrystalline silicon, thereby having lower reduction performance during metal-assisted chemical etching (MACE). A copper deposition experiment was conducted to study the etching hindering effect caused by silicon surface ST-α-Si phases. The result showed that the presence of ST-α-Si adversely affected copper deposition. To improve the MACE uniformity, a pretreatment involving the use of HF/H 2 O 2 mixed solution to remove the surface ST-α-Si layer was investigated. After HF/H 2 O 2 pretreatment, the uniformity of inverted pyramids formed through MACE on the silicon wafer surface was significantly improved. Moreover, the reflectance of the MACE-textured surface was reduced to 7.67% from 10.1% compared with that without pretreatment. Therefore, this study provides reference guidelines and useful approaches for preparing uniform inverted pyramid surfaces using MACE in ultra-thin silicon wafers.

Cu-assisted Chemical Etching of Diamond Wire Sawn Multicrystalline Silicon Wafers for Texturing

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Controllable nano-texturing of diamond wire sawing polysilicon wafers through low-cost copper catalyzed chemical etching

Effect of Additives on Making Texture Surface on Multicrystalline Silicon Wafer by Diamond Wire Sawing

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

Nano-Texturing of Silicon Wafers Via One-Step Copper-Assisted Chemical Etching

High-Efficient Solar Cells Textured by Cu/Ag-Cocatalyzed Chemical Etching on Diamond Wire Sawing Multicrystalline Silicon

Surface damage and metal-catalyzed chemical etching investigation of multicrystalline silicon by diamond wire sawing

Versatile Strategies for Improving the Performance of Diamond Wire Sawn Mc-Si Solar Cells

One-step Cu-assisted chemical etching at room temperature of inverted pyramid array for high-performance crystalline silicon solar cells

Nano-Texturing of Single Crystalline Silicon Via Cu-Catalyzed Chemical Etching

Silicon Surface Texturing Via Tbab-Sds Composite Additives Enhanced Copper-Assisted Chemical Etching

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Ultra-Thin Silicon Wafers Fabrication and Inverted Pyramid Texturing Based on Cu-Catalyzed Chemical Etching

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

Surface Texturing Behavior of Nano-Copper Particles under Copper-Assisted Chemical Etching with Various Copper Salts System

An Innovative Light Trapping Structure Fabrication Method on Diamond-Wire-Sawing Multi-Crystalline Silicon Wafers

Research on Silicon Wafer Surface Phase under the Ultra-thin Slicing Process and Its Etching Hindrance Behavior during Metal-Assisted Chemical Etching

Research of Texturization on Multi-crystalline Silicon Surface for Solar Cell

Effects of H2O2, Cu(NO3)2 and HF temperatures on surface texturization of diamond-wire-sawn multicrystalline silicon wafer

A Continuous, Single-Face Wet Texturing Process for Industrial Multicrystalline Silicon Solar Cells Using a Surfactant Treated Photoresist Mask