Abstract:Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely temperature and time of Cu-assisted chemical etching was thoroughly investigated for the optimization of the light absorption properties. P-type monocrystalline wafers were selectively treated with Cu(NO3)2.3H2O:HF:H2O2:DI water solution at 50 °C for five different time duration. The entire process was repeated at five different temperatures for 20min as well to study the relation between etching temperature and surface reflectance. Sonication bathing was used for the removal of the deposited Cu atoms from the surface with the variation of time and the effect was examined using energy dispersive spectroscopy (EDS). Field emission scanning electron microscopy (FESEM) and UV/VIS spectroscopy were conducted to study the surface morphology and light absorbance respectively. Inverted shapes almost similar to inverted pyramids or porous surface were found randomly on the surface of the wafer. The effect of temperature was found more significant compared to the effect of time variation. An optimum light reflectance was found at 50 °C for 20 min of texturization. Atomic force microscopy (AFM) of the textured sample revealed the average depth of pyramidal shape was about 1.58 μm. EDS results showed a proportional relation between time and Cu removal process, and a complete Cu atoms free textured surface after 25 min of sonication bathing. Therefore, a suitable Cu-assisted texturization technique was found, which could enable lowering the photo-reflectance below 1% without any antireflection coating.

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Metal-catalyzed chemical etching using DIO3 as a hole injection agent for efficient submicron-textured multicrystalline silicon solar cells

An Innovative Light Trapping Structure Fabrication Method on Diamond-Wire-Sawing Multi-Crystalline Silicon Wafers

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Silicon Rich Carbide As A Conductive Substrate For Si Qd Solar Cells

One-step Cu-assisted chemical etching at room temperature of inverted pyramid array for high-performance crystalline silicon solar cells

Effect of Additives on Making Texture Surface on Multicrystalline Silicon Wafer by Diamond Wire Sawing

Ultrafast Random‐Pyramid Texturing for Efficient Monocrystalline Silicon Solar Cells

Surface damage and metal-catalyzed chemical etching investigation of multicrystalline silicon by diamond wire sawing

MACE Texture Optimization for Mass Production of High-Efficiency Multi-Crystalline Cell and Module

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Texturization of Cast Multicrystalline Silicon for Solar Cells

Copper Assisted Inverted Pyramids Texturization of Monocrystalline Silicon in a Nitrogen Bubbling Bath for Highly Efficient Light Trapping

The Modulation of Surface Texture for Single-Crystalline Si Solar Cells Using Calibrated Silver Nanoparticles As a Catalyst

Microcrystalline Silicon‐carbon Alloys As Anti‐reflection Window Layers in High Efficiency Thin Film Silicon Solar Cells

Study and analysis the Cu nanoparticle assisted texturization forming low reflective silicon surface for solar cell application

(Invited) Defects in Cast-Mono Crystalline Silicon

Designing Efficient Solar-Driven Hydrogen Evolution Photocathodes Using Semitransparent Moq(X)Cl(Y) (Q = S, Se) Catalysts on Si Micropyramids

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al 2 O 3 passivation layer

Nano silver-catalyzed chemical etching of polycrystalline silicon wafer for solar cell application