Diamond Micropowder Synthesis Via Graphite Etching in a Microwave Hydrogen Plasma
Kaili Yao,Bing Dai,Jiaqi Zhu,Victor Ralchenko,Guoyang Shu,Jiwen Zhao,Peng Wang,Benjian Liu,Ge Gao,Mingqi Sun,Kang Liu,Zhijun Lv,Lei Yang,Jiecai Han
DOI: https://doi.org/10.1016/j.powtec.2017.09.021
IF: 5.64
2017-01-01
Powder Technology
Abstract:Diamond micro powders have been synthesized by chemical vapor deposition via etching a graphite substrate in hydrogen microwave plasma, without a hydrocarbon (methane) gas addition. The graphite temperature, varying from 700 to 1000°C, was found to significantly affect the diamond nucleation and growth, the growth rate of the diamond particles increasing from 2.4 to ≈4μm/h with the temperature. The diamond powders had a better crystalline quality at the substrate temperature of 900°C. Because of low adhesion of the deposited grit to the substrate the particles can be collected easily and mechanically disaggregated. The average size of ≈12μm of the dispersed particles grown for 5h, was determined with a laser particle size analyzer, while the maximum grain size estimated with electron microscopy, varied between 12 and ≈20μm. The particle's surface exhibited many micro-pyramids with sharp tips, that could be beneficial for abrasive applications. X-ray diffraction and Raman spectroscopy revealed high purity and quality of the diamond powders.