Abstract:The propagation behavior of threading dislocations (TDs) and the effects of Burgers vectors in hydride vapor phase epitaxy (HVPE) GaN bulk crystals generated on Na-flux-grown GaN and in a commercially available HVPE-grown GaN bulk crystal were investigated. Analyses based on chemical etching and transmission electron microscopy (TEM) revealed a close correlation between the etch pit sizes and the Burgers vector of these TDs. The existence of TDs with the unique Burgers vector b = 1m + 1c was observed for the first time ever using a large-angle convergent-beam electron diffraction technique and plan-view bright-field scanning TEM. Multi-photon excitation photoluminescence microscopy observations showed that TDs with b = 1c had a meandering morphology in contrast to the linear morphology of TDs with b = 1a, 1a + 1c, or 1m + 1c in both types of HVPE-grown GaN crystals. The inclinations of TDs with b = 1a and 1a + 1c in HVPE-grown GaN on Na-flux-grown GaN were greatly affected by large symmetrical hexagonal hillocks. The TDs with b = 1a were inclined in the slope directions of the hillock planes, while those with b = 1a + 1c were inclined in the a directions parallel or antiparallel to the a component in their Burgers vector. These inclinations were readily explained by the isotropic elastic theory of an individual TD. The hillocks were produced around pairs of parallel mixed TDs for which the a components were opposite to one another. This phenomenon was attributed to inclusions at the interface between the Na-flux-grown GaN substrate and the HVPE-grown layer. The origins of other TDs including unusual ones having b = 1m + 1c are also discussed herein.

Caution in building a Burgers circuit for studying secondary dislocations

Computation of Burgers vectors from elastic strain and lattice rotation data

Measuring the Burgers Vector of Dislocations with Dark-Field X-ray Microscopy

On the Determination of Burgers Vectors of Type-B Dislocations in an Al70co15ni15 Decagonal Quasi-Crystal by Convergent-Beam Electron-Diffraction

Contrast of Dislocations in 4H-Sic by SR Topography in Grazing-Incidence Geometry

A study of dislocations generated by inclusions in gadolinium gallium garnet crystals by birefringence topography

Dislocations Observed by Transmission Electron-Microscopy in the Quasi-Crystalline Phase T2 of Al-Li-Cu after Deformation

Propagation of threading dislocations and effects of Burgers vectors in HVPE-grown GaN bulk crystals on Na-flux-grown GaN substrates

Direct observation and three dimensional structural analysis for threading mixed dislocation inducing current leakage in 4H–SiC IGBT

Birefringence Images of Screw Dislocations Viewed End on in Cubic-Crystals Containing A Long-Range Stress-Field

Study on the Perfect Dislocation in Cd0.9Zn0.1Te Single Crystals by HRTEM

Electron Tomography of Dislocations in an Al-Cu-Mg Alloy

Coincidence structures of interfacial steps and secondary misfit dislocations in the habit plane between Widmanstätten cementite and austenite

Calculation of dislocation positions and curved transition pathways in BCC crystals from atomic displacements

Transmission Electron Microscopy Observation of a Dislocation Loop in an Al70Co15Ni15decagonal Quasicrystal

Identification of dislocation characteristics in Na-flux-grown GaN substrates using bright-field X-ray topography under multiple-diffraction conditions

Experimental Characterization of Dislocations in Deformation Induced Planar Boundaries of Rolled Aluminium

Dislocations in Phase-Change Ge2sb2te5 Alloy

Molecular dynamics study on the Burgers vector transition of nanometric dislocation loops induced by cascade in bcc-iron

Dislocation content of grain boundary phase junctions and its relation to grain boundary excess properties