Abstract:Low-alloy steels are constituted of twenty-four variants of lath martensite that exhibit gradients of orientations from Kurdjumov-Sachs (KS) to Nishiyama-Wassermann (NW). They are structured into four packets on each of the common close-packed plane {111}fcc// {110}bcc; and each packet is composed of three blocks constituted by pairs of low-misoriented variants. The habit planes reported in literature for this type of martensite are {557}fcc, but it is not clear whether they correspond to the laths or to the blocks. In this paper, we present crystallographic calculations proving that the average of the two KS distortions associated with the variants in a block is exactly a NW distortion. A new method of averaging distortion matrices was introduced for this purpose. It is also shown that the {575}fcc planes are let untilted by this NW distortion, and are thus good theoretical candidates for the observed habit planes. The predicted {575}fcc planes, however, do not contain any of the common close-packed directions of the two variants in the block, which is in apparent contradiction with the current view. In order to clarify this point, some Electron BackScatter Diffraction (EBSD) maps were acquired on different low-carbon steels; the prior austenitic grains were automatically reconstructed and the traces of the habit planes predicted by the different models were analyzed and compared to the morphologies. This experimental work shows that {575}fcc planes are the habit plane of the blocks, and that the habit plane of one block often dominates the others, which impedes to discriminate the different models. The advantages of our model are its simplicity, the absence of fitting parameters, and the symmetric role played by the variants the blocks.

A Simple Method for Calculating the Possible Habit Planes Containing One Set of Dislocations and Its Applications to Fcc/bct and Hcp/bcc Systems

A SIMPLE VECTOR ANALYSIS METHOD FOR MARTENSITE CRYSTALLOGRAPHY

Analytical O-line Solutions to Phase Transformation Crystallography in Fcc/bcc Systems

An energetic study on the preference of the habit plane in Fcc/bcc System

A systematic investigation of the development of the orientation relationship in an fcc/bcc system

A two-dimensional analytical approach for phase transformations involving an invariant line strain

A Study of a New Type of Deviation from the Kurdjumov–Sachs Orientation Relationship in Face-Centered-cubic/body-centered-cubic Transformation System

Interpretation of the Habit Plane of Δ Precipitates in Superalloy Inconel 718

A Two-Dimensional Analytical Method for the Transformation Crystallography Based on Vector Analysis

A crystallographic model of the {557} habit planes in low-carbon martensitic steels

Invariant Deformation Element Model Interpretation to the Crystallography of Diffusional Body-Centered-Cube to Face-Centered-Cube Phase Transformations

MACRO- AND MICROSCOPIC APPROACHES TO PLANE STRAIN DEFORMATION STATES OF FACE-CENTERED CUBIC METALS UNDER WEDGE INDENTATION

Why do the solutions of the habit plane of lath martensite converge? —An application of decomposition of the transformation displacement field

Crystallography of FCC(γ)→HCP(ϵ) martensitic transformation in Fe-Mn-Si based alloys

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Continuous atomic displacements and lattice distortions during martensitic transformations in fcc-bcc-hcp systems

Dislocation description of martensite interfaces based on misfit analysis

The Invariant Line and Precipitate Morphology in Fcc-Bcc Systems

Quantitative Characterization of Planar Faults with Dissociated <111> Screw Super-Dislocations in B2 Alloys

A Systematic Study of Irrational Precipitation Crystallography in Fcc–bcc Systems with an Analytical O-line Method

A systematic study on the interfacial energy of O-line interfaces in fcc/bcc systems