Abstract:The increasing capacity of medium‐ or large‐size hydroelectric generators challenges conventional grounding methods in limiting single‐phase to earth fault current and displacement voltage within the required range, posing threats to power generation and grid stability. To address this, the paper introduces a novel grounding method using high impedance to restrict unexpected overcurrent and overvoltage, optimizing device parameters with minimal trials to minimize fault current and displacement voltage. Additionally, a novel indicator is proposed to validate grounding method effectiveness through displacement voltage change, with successful implementation in large‐size hydroelectric generators demonstrated through theoretical calculation and field experiments. As the capacity of medium or large hydroelectric generators increases, conventional grounding methods face challenges in effectively limiting single‐phase to earth fault current and neutral displacement voltage within acceptable range. Excessive fault current and neutral displacement voltage pose threats to the stability and safety of power generation and transmission systems. Inherent design deficiencies in conventional grounding methods lead to failures in meeting fault current and voltage requirements. To address this, this paper proposes a novel grounding method utilizing high impedance to restrict excessive fault current and neutral displacement voltage. The method minimizes both fault current and neutral displacement voltage by optimally selecting device parameters through minimal iterative trials. Additionally, a novel indicator is introduced to evaluate the effectiveness of grounding method by monitoring changes in neutral displacement voltage. The method is tested through theoretical calculation and field experiments, successfully implemented in large‐size hydroelectric generator.

Experimental Study On Single-Phase Grounding Fault Safety Current Of Large Generators

Safety Performance of Large Grounding Grid with Fault Current Injected from Multiple Grounding Points

Research on Non-Fault-phase Current Characteristics in Grounding Fault in Power Transmission Grid

Generator stator windings ground fault diagnosis for generator–grid directly connected system of floating nuclear power plant

Reconsideration and Anxiety of Neutral Grounding Mode for Large Generator

TRANSIENT ANALYSIS ON LARGE HYDRO-GENERATOR WITH HIGH RESISTANCE GROUNDING

Study on the Characteristics of Turn-to-Turn Short Circuit Faults in the Primary Windings of the Generator Terminal Voltage Transformer

The Steady-state Fault Characteristics of a Large Hydro-generator with Inter-turn Short Circuit of Field Windings

Analysis of Unbalance of Three-phase Leak Current in DC Dielectric Test of 1 000 MW Generator Stator in Nuclear Power Plant

Study on Single-Phase Grounding Current Protection of Distribution Line in Neutral Grounding System Via Arc Suppression Coil

Protection schemes and sensitivity analysis for huge sized hydro-generator stator ground fault

Study on High Impedance Grounding Fault Protection for Personal Safety Guard in Distribution Grid

Transient multi-loop analysis on the stator ground fault of large synchronous generator--Experimental verification

TRANSIENT SIMULATION FOR THE STATOR GROUND FAULT OF LARGE-SIZED HYDRO-GENERATOR

Injecting Source-Based Stator Ground Fault Protection for Generators in Expanded Unit Connection

New Differential Protection Research for Generator Stator Single Phase Ground Fault

An Overview of Grounding Design and Grounding Fault Detection and Location Methods for a Multiphase Rectifier Generator Power Supply System

Studies on the Internal Fault Simulations of a High-Voltage Cable-Wound Generator

A novel high‐impedance neutral grounding method for medium‐ or large‐size hydroelectric generators

Research and improvement of stator grounding protection based on third-harmonic voltage for large-scale turbine generator

Improved Transient Simulation Of Salient-Pole Synchronous Generators With Internal And Ground Faults In The Stator Winding