Abstract:As one of the most important topics studied in creep fracture mechanics, mechanics fields at three-dimensional (3D) sharp V-notches and crack tip have drawn tremendous attentions. With many years efforts on constraint theory developed in creeping solids, there still seems dense fog on how in-plane and out-of-plane constraint effects are interacted for 3D sharp V-notch and crack in creeping solids. To shed lights on this topic, a 3D higher-order termed solution for sharp V-notches in creeping materials subjected to mode 1 loading is established by introducing the out-of-plane factor, which is the out-of-plane stress divided by the sum of in-plane normal stress. The solution can naturally be degenerated to a 3D crack. Based on the 3D higher-order term solution, a new fracture parameter is proposed and combined with to characterize 3D constraint effect. It is found that the stress exponents and angular distribution of higher-order term for 3D notches and cracks are highly related to . The proposed higher order termed solutions show better agreement with the FEA results than the 3D leading-term and 2D two-term solutions, especially for smaller notch angles and ligament width. Moreover, the presented 3D constraint theory shows that effects of and are highly interlinked rather than simply separated. It implies that the 3D constraint level may be significantly influenced by . The 3D mathematical solutions discussed in this paper could enhance the understanding of the 3D effect and has the potential to explain the 3D constraint effect on the notches and cracks under creep conditions.

Creep constraint analysis for test specimens with a wide range of dimensions and comparison with constraint of cracked pipes

Experimental Study of Unidirectional Compression Creep in K0 State for Rockfill Material

Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter A

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

Load-independent creep constraint analysis and solutions for surface cracks in pressurized pipes

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Effect and mechanism of constraint on creep crack growth behavior of GH3535 alloy

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep

Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack

Interpretation of non-conventional miniaturized creep test: derivation of equivalent gauge length

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Experimental Study on Loading-Creep Coupling Effect in Rockfill Material

Plastic Failure Analysis of Defective Pipes with Creep Damage under Multi-Loading Systems

Unified creep constraint parameter solutions for surface cracks in plates under tensile and bending loads

Creep fracture parameter C* solutions for semi‐elliptical surface cracks in plates under tensile and bending loads

AN ANALYSIS OF ELASTIC-PLASTIC-CREEP DAMAG FOR SMALL PUNCH CREEP TEST

Theoretical Investigation of Creep in Concrete Filled Steel Tube Columns under Long-Term Load

Study on creep characteristics and damage evolution of surrounding rock and filling body (SR-FB) composite specimens