Abstract:As one of the most important topics studied in creep fracture mechanics, mechanics fields at three-dimensional (3D) sharp V-notches and crack tip have drawn tremendous attentions. With many years efforts on constraint theory developed in creeping solids, there still seems dense fog on how in-plane and out-of-plane constraint effects are interacted for 3D sharp V-notch and crack in creeping solids. To shed lights on this topic, a 3D higher-order termed solution for sharp V-notches in creeping materials subjected to mode 1 loading is established by introducing the out-of-plane factor, which is the out-of-plane stress divided by the sum of in-plane normal stress. The solution can naturally be degenerated to a 3D crack. Based on the 3D higher-order term solution, a new fracture parameter is proposed and combined with to characterize 3D constraint effect. It is found that the stress exponents and angular distribution of higher-order term for 3D notches and cracks are highly related to . The proposed higher order termed solutions show better agreement with the FEA results than the 3D leading-term and 2D two-term solutions, especially for smaller notch angles and ligament width. Moreover, the presented 3D constraint theory shows that effects of and are highly interlinked rather than simply separated. It implies that the 3D constraint level may be significantly influenced by . The 3D mathematical solutions discussed in this paper could enhance the understanding of the 3D effect and has the potential to explain the 3D constraint effect on the notches and cracks under creep conditions.

Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter A

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

Effect and mechanism of constraint on creep crack growth behavior of GH3535 alloy

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Characterizations of Material Constraint Effect for Creep Crack in Center Weldment under Biaxial Loading

Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading

Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack

Effect of Weld Interface on Time-dependent Fracture Mechanics Parameters

Mismatch Constraint Effect of Creep Crack With Modified Boundary Layer Model

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

The Interacting Effect for Collinear Cracks Near Mismatching Bimaterial Interface under Elastic Creep

New Constraint Parameters Based on Crack Tip Plastic Zone: Theoretical Derivations and Effectiveness Verification

Analysis of creep crack growth in bonded joints based on a Paris' law-like approach

Load-independent creep constraint analysis and solutions for surface cracks in pressurized pipes

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel