NUMERICAL ANALYSIS OF SURFACE CRACK GROWTH IN PRESSURIZED CYLINDERS UNDER CREEP CONDITION
WEN JianFeng,GONG JianMing,TU ShanTung
DOI: https://doi.org/10.16579/j.issn.1001.9669.2012.01.006
2012-01-01
Abstract:In the study of metal creep,more and more efforts are being devoted to the materials and structures containing defects.Surface crack shape variation is one of the important issues in the study of leak-before-break(LBB) procedure.However,little attention has been paid to creep crack growth of surface cracks by numerical simulation.In the present study,a numerical analysis has been conducted on a low alloy Cr-Mo steel cylinder subjected to internal pressure at high temperature,with semi-elliptical crack located at the inner surface.The stress intensity factors(SIFs) and creep crack driving force parameter C*-integrals,calculated by numerical methods,are compared with results from previous studies.Good agreement has been obtained by comparing SIF,which demonstrates the FE(finite elememnt) model is reliable.The empirical equations of C*-integral,however,may be inaccurate under some condition.Moreover,the creep crack growth described by C*-integral is investigated using three-dimensional finite element analyses and a step-by-step analysis procedure based on codes ABAQUS is illustrated.Finally,crack profile development,C*-integral variation,crack depth,crack length and remaining life prediction are presented by studying several cases of different initial aspect ratios.It is observed that under monotonic internal pressure,the magnitude of crack length increment decreases as the initial aspect ratio ranges from 1 to 1/6,which is always minor compared with the crack depth increment.The crack profiles vary approaching to semi-circles and the aspect ratios increase all the time whatever the initial aspect ratio would be.In the final stage of the analyses,the boundary effect has been observed in C*-integral calculations.