Abstract:This paper presents a comprehensive investigation into the low cycle fatigue (LCF) and creep-fatigue interaction (CFI) behavior of 2.25CrMoV steel at an elevated temperature of 455 °C. The LCF tests are conducted using a triangular waveform with varying strain amplitudes ranging from 0.4 % to 0.7 %. Furthermore, the CFI tests are conducted using a trapezoidal waveform with different hold times and hold directions. To gain further insights, the microstructure and fracture behavior of the steel are characterized using optical, scanning, and transmission electron microscopy techniques. The results reveal that the softening behavior and fatigue life degradation of the steel are dependent on the applied strain amplitude, hold time, and hold direction. Higher strain amplitudes in the LCF tests lead to an increased number of crack initiation sources. During the CFI tests, fatigue fracture is identified as the primary failure mechanism under tensile hold conditions, and an increase in hold time promotes crack propagation. The interaction between fatigue and creep is found to be more significant in compressive hold and tensile compressive combination hold conditions. Microstructure analysis demonstrates that the lath structure recovers during cyclic loading, resulting in cyclic softening. Finally, a modified energy-based model is proposed to distinguish the different roles of tensile energy and compressive energy in the fatigue process. The proposed model accurately predicts the fatigue life of the 2.25CrMoV steel, as demonstrated by the good agreement between the experimental and predicted results.

ON THE TIME-DEPENDENT MATERIAL FRACTURE TOUGHNESS AT HIGH TEMPERATURE

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Low cycle fatigue and creep-fatigue interaction behavior of 2.25CrMoV steel at high temperature

Assessment of tensile deformation and fracture toughness behavior of 10Cr steel at ambient and high temperatures

Crack growth path of high-strength steel with different toughness under monotonic and cyclic loadings

Creep crack growth of GH3535 alloy at elevated temperatures

Experimental study on fracture toughness of high-strength structural steel and its

Correlation of Creep Fracture Lifetime with Microstructure Evolution and Cavity Behaviors in G115 Martensitic Heat-Resistant Steel

Effect of Weld Interface on Time-dependent Fracture Mechanics Parameters

On the Fracture Behavior of a Creep Resistant 10% Cr Steel with High Boron and Low Nitrogen Contents at Low Temperatures

Fracture toughness tests at low temperature for thick plate in steel structures

Investigation of Residual Stress Effect on Cleavage Fracture Toughness in the Transition Temperature Region by Considering the Crack-Tip Constraint

Experimental study on fracture resistant design method for steel structural components at low temperature

A prediction model of brittle crack arrest toughness in TMCP heavy plates

Experimental study and theoretical analysis of ECC type I fatigue fracture after subjected to sub-high temperature

Fracture Prediction of Powder Metallurgical Fe–Cu–C Steel at Elevated Temperatures Via Finite Element-Aided Hot Tensile Tests

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Fracture behavior of high-strength steels at elevated temperatures