Abstract:To maintain safety and reliability in power plants, creep-life prediction models have received much attention over the years. This article was designed to focus on the conditions when a material structure is exposed to extremely high temperatures and pressures with the help of finite element analysis. A direct comparison of the feasibility of different models' fitness and suitability in predicting creep damage was presented in this article by simulating the damage evolution of a uniaxial SS-304 specimen under a pre-defined load, using established constitutive creep models. Comparative assessments of minimum creep strain rate, creep deformation, and stress rupture were demonstrated using the Norton–Bailey (NB), Kachanov–Rabotnov (KR), Theta projection (TP), and sine-hyperbolic (SH) models while standardizing them with the Omega model. The FE results of a dog-bone specimen, while implementing the models, were compared with the actual creep experiment results to check for the models' reliability and validation. Subsequently, sensitivity studies of the established creep models were conducted using the statistical tools RSM and ANOVA, with an analysis of how the parameters for operation, design, and material dependency came into effect. Thus, quantitative and qualitative correlation analyses of the FE creep response for these five established models were conducted together, resulting in finalizing the selection of the most suitable model, the sine-hyperbolic model, for the SS-304 material under the defined boundary conditions. The 0.84 R2 value of the sine-hyperbolic model proved the model's selection for predicting the creep response of stainless steel 304. The method can be applied to select a suitable creep damage model as per the feasibility of the operating conditions.

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

The Relative Significance of Internal Damage Mechanisms on the Overall Creep Damage and Ultimate Failure of P91 Steel

Fatigue-Creep Interaction Of P92 Steel And Modified Constitutive Modelling For Simulation Of The Responses

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Experimental and Simulated Characterization of Creep Behavior of P92 Steel with Prior Cyclic Loading Damage

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

The development of creep damage constitutive equations for high Cr steel

Creep-Fatigue Life Evaluation for Grade 91 Steels with Various Origins and Service Histories

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

Creep-Fatigue Life Property Of P91 Welded Piping Subjected To Bending And Torsional Moments At High Temperature

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Remaining creep properties and fracture behaviour of P92 steel welded joint under prior low cycle fatigue loading

Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe

Thermal–mechanical Fatigue Behaviour of P92 T-piece and Y-piece Pipe

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material