Abstract:N‐type Mg3Sb2‐based material is recognized as a promising thermoelectric material. Ag is revealed as an effective dopant for the Mg3.2Sb1.5Bi0.49Te0.01 system with a different effect from Cu. A peak ZT of 1.64 at 673 K is achieved. Moreover, a 2‐pair module fabricated with MgAgSb as p‐type material, results in a high ηmax of ≈7.9% at relatively low ΔT of 277 K. The n‐type Mg3(Sb, Bi)2 compounds show great potential for wasted heat energy harvesting due to their promising thermoelectric properties. This work discovers that doping transition element Ag into the n‐type Mg3(Sb, Bi)2 can effectively optimize the power factor and suppress the lattice thermal conductivity simultaneously. Interestingly, the Ag doping has different effects compared to the isoelectronic and same group element Cu addition studied previously. A high power factor of 19.6 μW cm−1 K−2 is obtained at 673 K owing to the increased electrical conductivity. At the same time, the lattice thermal conductivity is reduced to ≈0.5 W m−1 K−1 because of enhanced phonon scattering induced by Ag atoms. These improvements lead to a peak figure of merit (ZT) of 1.64 at 673 K as well as a high average ZT of 1.27 is obtained from 323 K to 673 K. Furthermore, a thermoelectric single leg with a competitive conversion efficiency of ≈11% under a hot‐side temperature of 673 K is fabricated successfully. In addition, a 2‐pair module composed of n‐type Mg3(Sb, Bi)2 alloy and p‐type MgAgSb‐based compound demonstrates the high conversion efficiency of ≈7.9% at a temperature difference of 277 K, which will significantly upgrade the sustainable energy recycling technology.

Pressure-Induced Semimetal-Semiconductor Transition And Enhancement Of Thermoelectric Performance In Alpha-Mgagsb

Improving Thermoelectric Performance Of Alpha-Mgagsb By Theoretical Band Engineering Design

Thermoelectric Properties of Mg3(Bi,Sb)2 under Finite Temperatures and Pressures: A First-Principles Study

Thermoelectric performance enhancement of Pb-doped α -MgAgSb near room temperature

Intrinsically high thermoelectric performance in near-room-temperature α-MgAgSb materials

Electronic Topological Transition As a Route to Improve Thermoelectric Performance in Bi0.5 Sb1.5 Te3.

Effect of hydrostatic pressure and alloying on thermoelectric properties of van der Waals solid KMgSb: An \textit{ab-initio} study

Enhancing the Thermoelectric Performance of n‐Type Mg3Sb2‐Based Materials via Ag Doping

High thermoelectric performance of MgAgSb-based materials

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

High Thermoelectric Conversion Efficiency of MgAgSb-based Material with Hot-Pressed Contacts

High Thermoelectric Performance of Α-Mgagsb for Power Generation

High-Performance Low-Cost n-Type Se-Doped Mg3Sb2-Based Zintl Compounds for Thermoelectric Application

Large improvement in thermoelectric performance of pressure-tuned Mg 3 Sb 2

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Sintering pressure as a “scalpel” to enhance the thermoelectric performance of MgAgSb

Cost Effective Synthesis of P-Type Zn-doped MgAgSb by Planetary Ball-Milling with Enhanced Thermoelectric Properties

Predicting the optimized thermoelectric performance of MgAgSb

High-Performance Mg3Sb2-xBix Thermoelectrics: Progress and Perspective

The Critical Role of Boron Doping in the Thermoelectric and Mechanical Properties of Nanostructured Α-Mgagsb

Atomic Disorders Induced by Silver and Magnesium Ion Migrations Favor High Thermoelectric Performance in Α‐mgagsb‐based Materials