Abstract:A new strategy of Y doping and nanostructuring is designed for achieving outstanding thermoelectric performance in Mg3.2Sb1.5Bi0.49Se0.01‐based Zintls with a peak ZT of ≈1.87 at 773 K, a high average ZT of ≈1.2, and a high energy conversion efficiency of ≈13.8% predicted by a temperature gradient of 450 K. Thermoelectric Mg3+δ(Sb, Bi)2 Zintls have attracted significant attention because of their high‐performing, eco‐friendly, and cost‐effective features, but their thermoelectric properties still need improvement for application to practical devices. Here an outstanding ZT of ≈1.87 at 773 K and a high average ZT of ≈1.2 in n‐type Y‐doped Mg3.2Sb1.5Bi0.49Se0.01 are reported, both of which rank as top values among the reported literature. First‐principles calculations indicate that substituting the Mg site with Y shifts the Fermi level into the conduction band and simultaneously narrows the bandgap, both strengthening the n‐type semiconducting feature and boosting the electron carrier density of Mg3.2Sb1.5Bi0.49Se0.01. A high power factor of ≈21.4 μW cm–1 K–2 is achieved at 773 K in Mg3.18Y0.02Sb1.5Bi0.49Se0.01, benefiting from the rationally tuned carrier density of ≈7.7 × 1019 cm–3 at this temperature. In addition, the doped Ys act as point defects to cause significant lattice distortions and strains, confirmed by comprehensive micro/nanostructure characterizations. These lattice imperfections suppress the lattice thermal conductivity to ≈0.41 W m–1 K–1 at 773 K, leading to such a high ZT. Furthermore, a high energy conversion efficiency of ≈13.8% is predicted by a temperature gradient of 450 K, indicating a great potential to be applied to practical devices for mid‐temperature applications.

Improving Thermoelectric Performance Of Alpha-Mgagsb By Theoretical Band Engineering Design

Enhancing the Thermoelectric Performance of n‐Type Mg3Sb2‐Based Materials via Ag Doping

Optimization of the thermoelectric performance of α-MgAgSb-based materials by Zn-doping

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

High Performance Α-Mgagsb Thermoelectric Materials for Low Temperature Power Generation

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Thermoelectric performance enhancement of Pb-doped α -MgAgSb near room temperature

Enhancing thermoelectric performance of AB 2 Sb 2 -type Zintl phase through band shaping and lattice distortion

High-Performance Mg3Sb2-xBix Thermoelectrics: Progress and Perspective

Atomic Disorders Induced by Silver and Magnesium Ion Migrations Favor High Thermoelectric Performance in Α‐mgagsb‐based Materials

Thermoelectric performance improvement of p-type Mg3Sb2-based materials by Zn and Ag co-doping

Cost Effective Synthesis of P-Type Zn-doped MgAgSb by Planetary Ball-Milling with Enhanced Thermoelectric Properties

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Predicting the optimized thermoelectric performance of MgAgSb

Synergistic Effect of Band and Nanostructure Engineering on the Boosted Thermoelectric Performance of n‐Type Mg3+δ(Sb, Bi)2 Zintls

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

Realizing Cd and Ag codoping in p-type Mg3Sb2 toward high thermoelectric performance

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Realizing high thermoelectric performance in p-type CaZn2Sb2-alloyed Mg3Sb2-based materials via band and point defect engineering

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Improving Thermoelectric Performance of AgSbTe2 through Suppression of Ag2Te and Band Convergence via Mg and Ti Codoping