Abstract:A direct bidirectional current discharge path between the input/output (I/O) and ground (GND) is essential for the robust protection of charging device models (CDM) in the tightly constrained design parameters of advanced low-voltage (LV) processes. Dual-direction silicon controlled rectifiers (DDSCRs) serve as ESD protection devices with high efficiency unit area discharge, enabling bidirectional electrostatic protection. However, the high trigger voltage of conventional DDSCR makes it unsuitable for ASICs used for the preamplification of biomedical signals, which only operate at low supply voltage. To address this issue, a self-biased triggered DDSCR (STDDSCR) structure is proposed to further reduce the trigger voltage. When the ESD pulse comes, the external RC trigger circuit controls the PMOS turn-on by self-bias, and the current release path is opened in advance to reduce the trigger voltage. As the ESD pulse voltage increases, the SCR loop opens to establish positive feedback and drain the amplified current. Additionally, the junction capacitance is decreased through high-resistance epitaxy and low-concentration P-well injection to further lower the trigger voltage. The simulation results of LTspice and TCAD respectively demonstrate that ESD devices can clamp transient high voltages earlier, with low parasitic capacitance and leakage current suitable for ESD protection of high-speed ports up to 1.5V under normal operating conditions.

A Compact and Self-Isolated Dual-Directional Silicon Controlled Rectifier (SCR) for ESD Applications

Vertical Silicon-Controlled Rectifier for ESD Protection under 28nm Ps Process

Very Small Snapback Silicon-Controlled Rectifier for Electrostatic Discharge Protection in 28 Nm Processing.

Silicon-Controlled Rectifier Stacking Structure for High-Voltage ESD Protection Applications

A Novel Dual-Directional DTSCR in Twin-Well Process for Ultra-Low-voltage ESD Protection

Compact and Fast Response Dual-Directional SCR for Nanoscale ESD Protection Engineering

A Robust Polysilicon-Assisted SCR in ESD Protection Application

Novel Capacitance Coupling Complementary Dual-Direction SCR for High-Voltage ESD

RC-Embedded LDMOS-SCR with High Holding Current for High-Voltage I/O ESD Protection

A Novel Capacitance-Coupling-Triggered SCR for Low-Voltage ESD Protection Applications

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Low-leakage Diode-Triggered Silicon Controlled Rectifier for Electrostatic Discharge Protection in 0.18-Μm CMOS Process

An Area-Efficient LDMOS-SCR ESD Protection Device for the I/O of Power IC Application

High-Holding-Voltage Silicon-Controlled Rectifier for ESD Applications

A Self-Biased Triggered Dual-Direction Silicon-Controlled Rectifier Device for Low Supply Voltage Application-Specific Integrated Circuit Electrostatic Discharge Protection

New Bidirectional Silicon-Controlled Rectifier for Low-Voltage ESD Protection

Robust ESD Protection Device Based on Dual-Direction Silicon Controlled Rectifier

A novel straight through-MOS-triggered SCR for on-chip ESD protection

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

ESD protection design of DDSCR structure based on the 0.5 BCD process

Novel Ring Silicon-Controlled Rectifier for ESD Protection of Low-Voltage Circuits