Abstract:Heat transfer between binary particles in an internally heated downer pyrolyzer was carefully studied because it is an important element for the reactor design, but a consensus on the heat transfer process has not been achieved. Compared with the experimental, numerical simulation can provide more details for understanding the heat transfer process. In this work, the widely used multifluid model (MFM) was adopted with considering the multiscale heat convection, conduction, and radiation behaviors inside the downer pyrolyzer. To clearly recognize the exact route of how heat transfers from high-temperature char to low-temperature coal, herein, the rate of each heat transfer way was calculated and counted separately. It is found that the heat radiation and conduction directly transferred from char to coal are all relatively small, and the gas–coal convection is the main factor in the coal heating process. However, the heat carried by the gas into the pyrolyzer only accounts for less than 0.1% of the heat received by the coal, implying that the gas phase is only the heat source by direct contact while the char is the indirect but main heat source. This was confirmed by the thermal balance analysis. Therefore, a conclusion of two-stage heat convection processes was proposed, in which the heat first transfers from char to gas, then from gas to coal, and these two stages belong to heat convection. Hence, the gas phase plays an intermediate medium role in the heat transfer process. Furthermore, the final temperature of the coal increases with the decrease in heat carrier diameter but is not sensitive to the gas velocity. This work is expected to provide guidance for the optimization of an efficient downer-type pyrolyzer.

Mathematical Model of a Movingbed Coal Pyrolysis Chamber with Cycling Ash Serving As a Heat Carrier

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Heat and mass transfer analysis of coal coking process in the coking chamber

Numerical Analysis of Heat and Mass Transfer During Pyrolysis of Coal Particle

Modeling of Coal Drying before Pyrolysis

STUDY ON THE MATHEMATICAL MODEL OF COKE CARRIED-HEAT GASIFICATION COAL-FIRED COMBINED CYCLE

The Dynamic Model of Pulverized Coal and Waste Plastic Bonded Together in Flight Combustion Process.

Comprehensive Mathematical Model for Coal Combustion in a Circulating Fluidized Bed Combustor

Dynamic Behavior Of Fixed-Bed Coal Gasifiers: A Dual-Onedimensional Percolation-Reaction Model

Modeling and Simulation of Carbonization Chamber Heat Transfer Process in Coke Oven

Sulfur Transfer Characteristics and Pyrolysis Simulation in the Coal Polygeneration Process

KINETIC MODEL PREDICTION FOR VARIOUS COAL GASIFICATION SCHEMES IN A FLUIDIZED BED Ⅰ.MODEL ESTABLISHMENT AND VALIDATION

Modeling of Single Coal Particle Combustion in O2/N2 and O2/CO2 Atmospheres under Fluidized Bed Condition

Model of coal slime combustion behavior in CFB boiler

Simulation of Heat Transfer in a Downer-Type Pyrolyzer with Binary Particles by Considering Carrying Gas Role in the Coal Heating Process

A MODEL FOR PREDICTING HEAT TRANSFER PROCESS WITH COAL ASH DEPOSITION IN UTILITY BOILERS

Mathematical model of wood pyrolysis considering effects of moisture

MATHEMATICAL MODELING AND NUMERICAL STUDY OF BIOMASS FIXED CARBON GASIFICATION IN A DENSE BED AT ATMOSPHERIC PRESSURE. PART 2. ANALYSIS OF NUMERICAL RESULTS

NUMERICAL SIMULATION FOR DRYING PROCESS OF GAS FLOW CONTAINING HUMID COAL ASH PARTICLES