Abstract:Coal pyrolysis to acetylene in thermal plasma provides a direct route to make chemicals from coal resources, where the rapid heating and release of volatile matters in coal particles play the dominant role in the overall reactor performance. A mechanism model incorporating the heat conduction in solid materials, diffusion of released volatile gases, and reactions was proposed for a deep understanding of the heat transport inside a coal particle under extreme environmental conditions such as high temperatures greater than 2000 K and milliseconds of reaction time. The two competing rates model, known as the Kobayashi model, was applied to describe the devolatilization kinetics, which was verified by comparing the predicted yield of volatiles with the experimental data in the literature. Thermal balance between coal particles and the hot carrier gas was established, and the four influencing factors including the heating rate, particle size, reactants flow ratio, and heat of devolatilization were paid attention when analyzing the heating profile inside the particles and the yield of volatiles. The results showed that the inherent resistance due to the volatiles released from coal particles seriously impeded the thermal energy transportation from heating gas to the particle. This led to a weakened heating rate, i.e., a long heating up time, and thereafter a low yield of volatiles, especially when the particle size was large (e.g., > 40 mu m). Meanwhile, the heat conduction inside the coal particle also imposed additional resistance to reduce the heat transportation rate from heating gas to the particle, especially when the particle size was larger than 80 mu m. The predicted yield of volatiles considering the mechanism of the two resistances agreed reasonably with the reported experimental data under different operating conditions but was smaller than that which could be obtained when neither resistance is considered. It can be concluded that the proposed heat transport mechanism inside coal particles works well in understanding the coal pyrolysis process at ultrahigh temperatures.

Numerical Analysis of Heat and Mass Transfer During Pyrolysis of Coal Particle

A Numerical Study on the Pyrolysis of Large Coal Particles: Heat Transfer and Volatile Evolution

Molecular Reaction Dynamics Simulation of Pyrolysis Mechanism of Typical Bituminous Coal Via ReaxFF

Heat and mass transfer analysis of coal coking process in the coking chamber

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Numerical Model Development and Validation for Hydrocarbon Fuel Supercritical Heat Transfer with Endothermic Pyrolysis

Numerical simulation of heat transfer properties of large-sized biomass particles during pyrolysis process

Effect of heating rate of pyrolysis on coal particle pore structure

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Numerical simulation of coal pyrolysis using FD model

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Simulations on Pyrolysis of Different Coals by the Boltzmann–Monte Carlo Percolation (BMCP) Model

Modeling of Coal Drying before Pyrolysis

Particle-scale Heat and Mass Transfer Processes During the Pyrolysis of Millimeter-Sized Lignite Particles with Solid Heat Carriers

Heat Transfer Inside Particles and Devolatilization for Coal Pyrolysis to Acetylene at Ultrahigh Temperatures

CFD Modeling of Coal Pyrolysis in Externally Heated Fixed-Bed Reactor

Numerical simulation of heat transfer process of coal combustion in fluidized bed by using discrete element method

Pyrolysis of Superfine Pulverized Coal. Part 5. Thermogravimetric Analysis

Numerical Modeling Research for Coal Combustion in Traveling Grate Industrial Boilers

Particle-Scale Heat and Mass Transfer Processes in Lignite Pyrolysis with Solid Heat Carrier