Abstract:In order to get a deep understanding of biomass pyrolysis and gasification with particle size ranging from several millimeters to centimeters, detailed modeling of thermochemical conversion of thermally thick particles is required. In this paper, a new pyrolysis model for a large biomass particle is established, and the porous particle is modeled with two systems. In the continuous system, a uniform multiphase CFD algorithm is implemented to resolve both internal and external flow fields, and the solid temperature is solved by considering heat conduction, heat convection, and radiation. In the discrete system, the large particle is regarded as a porous media and discretized into a cluster of small virtual particles which are used to model the devolatilization and particle shrinkage. The evolutions of porosity and internal specific surface area during pyrolysis are also taken into account. The proposed model is first validated with the experiments in the literature, and good agreements have been obtained. Moreover, the temperature contour, gas species distribution, and streamlines both inside and outside the particle, which cannot be provided by the experiment, are also presented and analyzed. In addition, the effects of particle size, initial porosity, pore structure parameter, inflow velocity, tar generation, devolatilization heat, and particle shape on pyrolysis behavior are also explored. It is found that, increasing initial porosity, specific surface area, inflow velocity, particle length -to -width ratio, and decreasing particle diameter will reduce the intraparticle temperature gradient, which is also greatly influenced by the Stefan flow effect. Tar generation influences the thermophysical properties of the released gas and the interphase convective heat transfer. All the simulation results demonstrate that the current model is capable of capturing the detailed evolution of a large biomass particle during pyrolysis and providing deeper insight into the interaction between the particle and the surrounding gas.

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Molecular Reaction Dynamics Simulation of Pyrolysis Mechanism of Typical Bituminous Coal Via ReaxFF

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Insight into reaction performance and product formation in a novel coal pyrolyzer of pilot-scale test

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Mathematical Model of a Movingbed Coal Pyrolysis Chamber with Cycling Ash Serving As a Heat Carrier

Study on the low temperature coal pyrolysis by solid heat carrier in a moving bed pyrolyzer

Simulation of Heat Transfer in a Downer-Type Pyrolyzer with Binary Particles by Considering Carrying Gas Role in the Coal Heating Process

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Modeling of Coal Drying before Pyrolysis

The characteristic research of Shenmu coal pyrolysis by solid heat carrier

Numerical Analysis of Heat and Mass Transfer During Pyrolysis of Coal Particle

Experimental and numerical investigation on the heat and mass transfer performance of tar rich coal in-situ pyrolysis

Flow Characteristics of Mixed Particles with a Simulated Cold State in Moving Bed Reactor

The Influence of Solid Heat Carrier Load of Char on Pyrolysis Characteristics of Pulverized Coal in a Fluidized Bed Reactor

Numerical Investigation of the Heat and Mass Transfer during the In Situ Pyrolysis Process of Oil-Rich Coal

Cross‐Scale Modeling and Simulation of Coal Pyrolysis to Acetylene in Hydrogen Plasma Reactors

Heat and mass transfer analysis of coal coking process in the coking chamber

Simulation of Biomass Pyrolysis in a Fluidized Bed Reactor Using Thermally Thick Treatment