Abstract:A reasonable and effective macromolecular model of bituminous coal was established. The molecular dynamics method based on reactive force field (ReaxFF) was used to simulate the pyrolysis process of typical bituminous coal in the range of 1400–2600 K. The distribution of products and evolution of intermediate radicals were analyzed. Calculation results showed that with increase of pyrolysis temperature, yield of char firstly increased and then decreased, while the trend in tar production was opposite. Yield of pyrolysis gas increased monotonously with increasing temperature. The pyrolysis of coal at low temperature mainly experienced primary reaction with formation of tar free radical fragments and small molecular gases. At high temperature, the secondary reaction of tar fragments was remarkable, and char with more content but less quantity and small molecular gas with more content and quantity were produced. The temperature turning point from the primary reaction to the second one was 2000 K. Under the high temperature pyrolysis conditions, C and H in coal gradually migrated into char and tar, while oxygen-containing functional groups were more active, resulting in migration of O to pyrolysis gases. In the secondary reaction stage, comparing chemical properties of the three elements C, H and O, O was the most active, H was the second, and C was the most stable. H2O was firstly released during pyrolysis. NH3 mainly came from secondary reactions during which H2S was consumed and converted into other products. Yield of H2 was the highest, and increased with increasing pyrolysis temperature. A large amount of H2 was generated in secondary reactions, which was mainly from collision of hydrogen radicals generated from pyrolysis and condensation of aromatic structures. Based on ReaxFF simulation results, the weightless activation energy of coal pyrolysis was 39.45 kJ/mol.

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Molecular Reaction Dynamics Simulation of Pyrolysis Mechanism of Typical Bituminous Coal Via ReaxFF

The characteristic research of Shenmu coal pyrolysis by solid heat carrier

Pyrolysis behaviors and product distribution of Shenmu coal at high heating rate: A study using TG-FTIR and Py-GC/MS

Experimental Research on Pyrolysis Characteristics of Coal in Dual Fluidized Beds

Insight into reaction performance and product formation in a novel coal pyrolyzer of pilot-scale test

Experimental research on coal pyrolysis in dual fluidized beds

Mathematical Model of a Movingbed Coal Pyrolysis Chamber with Cycling Ash Serving As a Heat Carrier

Numerical Analysis of Heat and Mass Transfer During Pyrolysis of Coal Particle

High-temperature pyrolysis behavior of two different rank coals in fixed-bed and drop tube furnace reactors

Simulation of Heat Transfer in a Downer-Type Pyrolyzer with Binary Particles by Considering Carrying Gas Role in the Coal Heating Process

Numerical Investigation of the Heat and Mass Transfer during the In Situ Pyrolysis Process of Oil-Rich Coal

Experimental and numerical investigation on the heat and mass transfer performance of tar rich coal in-situ pyrolysis

Thermogravimetric study of the kinetics and characteristics of the pyrolysis of pulverized coal

Research on Coal Pyrolysis Property for Polygeneration Technology

Heat and mass transfer analysis of coal coking process in the coking chamber

Simulations on Pyrolysis of Different Coals by the Boltzmann–Monte Carlo Percolation (BMCP) Model

Kinetic characteristics and reactive behaviors of HSW vitrinite coal pyrolysis: A comprehensive analysis based on TG-MS experiments, kinetics models and ReaxFF MD simulations

Sulfur Transfer Characteristics and Pyrolysis Simulation in the Coal Polygeneration Process