Abstract:Coal pyrolysis to acetylene in thermal plasma provides a direct route to make chemicals from coal resources, where the rapid heating and release of volatile matters in coal particles play the dominant role in the overall reactor performance. A mechanism model incorporating the heat conduction in solid materials, diffusion of released volatile gases, and reactions was proposed for a deep understanding of the heat transport inside a coal particle under extreme environmental conditions such as high temperatures greater than 2000 K and milliseconds of reaction time. The two competing rates model, known as the Kobayashi model, was applied to describe the devolatilization kinetics, which was verified by comparing the predicted yield of volatiles with the experimental data in the literature. Thermal balance between coal particles and the hot carrier gas was established, and the four influencing factors including the heating rate, particle size, reactants flow ratio, and heat of devolatilization were paid attention when analyzing the heating profile inside the particles and the yield of volatiles. The results showed that the inherent resistance due to the volatiles released from coal particles seriously impeded the thermal energy transportation from heating gas to the particle. This led to a weakened heating rate, i.e., a long heating up time, and thereafter a low yield of volatiles, especially when the particle size was large (e.g., > 40 mu m). Meanwhile, the heat conduction inside the coal particle also imposed additional resistance to reduce the heat transportation rate from heating gas to the particle, especially when the particle size was larger than 80 mu m. The predicted yield of volatiles considering the mechanism of the two resistances agreed reasonably with the reported experimental data under different operating conditions but was smaller than that which could be obtained when neither resistance is considered. It can be concluded that the proposed heat transport mechanism inside coal particles works well in understanding the coal pyrolysis process at ultrahigh temperatures.

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Molecular Reaction Dynamics Simulation of Pyrolysis Mechanism of Typical Bituminous Coal Via ReaxFF

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

CFD Modeling of Coal Pyrolysis in Externally Heated Fixed-Bed Reactor

Mathematical Model of a Movingbed Coal Pyrolysis Chamber with Cycling Ash Serving As a Heat Carrier

Sulfur Transfer Characteristics and Pyrolysis Simulation in the Coal Polygeneration Process

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

A Numerical Study on the Pyrolysis of Large Coal Particles: Heat Transfer and Volatile Evolution

Insight into reaction performance and product formation in a novel coal pyrolyzer of pilot-scale test

Flow Characteristics of Mixed Particles with a Simulated Cold State in Moving Bed Reactor

Heat Transfer Inside Particles and Devolatilization for Coal Pyrolysis to Acetylene at Ultrahigh Temperatures

CFD model of coal pyrolysis in fixed bed reactor

Numerical Analysis of Heat and Mass Transfer During Pyrolysis of Coal Particle

Simulation of Heat Transfer in a Downer-Type Pyrolyzer with Binary Particles by Considering Carrying Gas Role in the Coal Heating Process

Particle‐scale modeling of coal devolatilization behaviors for coal pyrolysis in thermal plasma reactors

Analysis of particle heating and devolatilization during rapid coal pyrolysis in a thermal plasma reactor

Cold Simulation Analysis of Flow Characteristics of High-Temperature Mixture in a Moving-Bed Reactor

Cross‐Scale Modeling and Simulation of Coal Pyrolysis to Acetylene in Hydrogen Plasma Reactors

Modeling of Coal Drying before Pyrolysis