Abstract:Air-blown gasification in a lab-scale bubbling fluidized gasifier reactor with continuous coal feedstock is numerically investigated by employing the reactive multiphase particle-in-cell (MP-PIC) approach in which the gas and solid motions are respectively tracked in the Eulerian and Lagrangian frameworks. After comparing the numerical predictions with experimental measurements, the particle-scale thermochemical properties of coal particles together with the effects of operating parameters are comprehensively explored. The results show that the lateral and vertical segregation in the gasifier remarkably affects the thermochemical distributions of coal particles (i.e., temperature, heat transfer coefficient, constituents, residence time, slip velocity, and particle Reynolds number). Close to coal inlet, coal particles have a small temperature, large heat transfer coefficient, and high content of moisture and volatile. Spatial distribution of slip velocity is similar to that of particle Reynolds number. Enlarging the air flow rate strengthens the coal gasification due to the decreased mass and the promotion of char conversion in the gasifier. The residence time distribution of coal particles in the reactor presents an "early peak with a long tail" feature. The air flow rate and gasification temperature exert an obvious impact on the carbon content in the exiting coal particles. The increase of gasification temperature and air flow rate obviously promote the carbon conversion efficiency. The numerical results regarding the thermochemical behaviors of coal gasification in the bubbling fluidized gasifier reactor shed light on the design and optimization of this kind of reactor.

Cold Simulation Analysis of Flow Characteristics of High-Temperature Mixture in a Moving-Bed Reactor

Flow Characteristics of Mixed Particles with a Simulated Cold State in Moving Bed Reactor

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Cold Mixing Characteristics of Solid Particles Based on the Coal Pyrolysis with Circulating Ash Heat Carrier

Simulation of Large Coal Particles Pyrolysis by Circulating Ash Heat Carrier Toward the Axial Dimension of the Moving Bed

Cold Model Test on Gas-Solid Two Phase Flow in Double Charge-Discharge Coal Ball Mill

Fluid Dynamics Investigation in a Cold Flow Model of Internal Recycle Quadruple Fluidized Bed Coal Pyrolyzer

Model analysis of gas/solid flow behavior in standpipe of CFB combined with a pyrolysis reactor

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Eulerian-Lagrangian simulation study of the gas-solid reacting flow in a bubbling fluidized coal gasifier

Theoretically Studies of the Coal Particle Cluster Combustion Behavior in a Circulating Fluidized Bed

Simulation of Coal Pyrolysis by Solid Heat Carrier in a Moving-Bed Pyrolyzer

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Dynamic Heat Transfer Characteristics of Gas-solid in Medium Speed Mill

Simulation of Heat and Mass Transfer in a Moving Bed Part-fluidized Boiler

Study on the low temperature coal pyrolysis by solid heat carrier in a moving bed pyrolyzer

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Cold Model Study Of A 1.5 Mwth Circulating Turbulent Fluidized Bed Fuel Reactor In Chemical Looping Combustion

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

Multiphase flow and reactor optimization of a 1MWth pilot-scale circulating fluidized bed for coal staged conversion