Abstract:Integrated airframe/propulsion aerodynamic tests in a hypersonic wind tunnel are critical for developing an air-breathing hypersonic vehicle. Spurred by the shortcomings of traditional wind tunnel testing technology, this paper proposes a new aerodynamic testing technology called the balance-support integrated device (BSD). Additionally, we suggest a BSD optimization design method to improve BSD’s test performance. To reduce the impact of various interference signals on BSD‘s test accuracy, this study proposes an aerodynamic identification technology that effectively eliminates the influence of the model’s inertia force and the impact force generated by the joint BSD. We evaluate BSD’s performance by conducting several calibration tests, which reveal that the sensitivity of each BSD’s test channel is 2.3525 N/μV (drag test channel), 1.2691 N/μV (lift test channel), 9.7386 N.m/μV (pitching moment test channel). The test channel interference of lift to drag is less than 6.3 %, and drag to lift is less than 2.5 %, demonstrating that the wind tunnel force measurement system has an appealing sensitivity and less interference between the channels. Finally, we further challenge BSD’s test accuracy against the mature box balance technology on aerodynamic tests under Ma5.5, Ma6.0, and Ma6.5 conditions considering a 2-meter vehicle model in the Φ600mm pulse combustion wind tunnel. The test results highlight that the maximum test error of the lift test channel, drag test channel, and pitching moment Mz is 1.60 %, 6.45 %, and 4.99 %, respectively, proving that BSD can accurately measure the aerodynamic force during the test.

Research about continuous scanning test technique based on non-contact measurement technique in low speed wind tunnel

Development of Small-sized and Direct-current Calibration Wind Tunnel

Research on high-speed and non-contact angle detection based on laser measurement

A Non-Contact Dynamic Attitude Measurement System Based on 3D Oblique Laser Doppler Vibrometers

Key technique for high angle of attack test of fighter aircraft in Φ3.2m low speed wind tunnel

Pose measurement method and experiments for high-speed rolling targets in a wind tunnel

Present Research Status and Prospective Application of Wind-Tunnel Free-Flight Test Technique

Dynamic test experiment system of single degree of freedom of Φ3.2 m wind tunnel

Similarity criteria and simulation method for flight control system of free-flight test in low speed wind tunnel

Fast Scanning Mode and Its Realization in a Scanning Acoustic Microscope

Overview of dynamic test techniques at low speed aerodynamics institute , cardc

Identification of Lateral-Directional Aerodynamic Parameters via an Online Correction Wind Tunnel Virtual Flight Test

Advancements in Tunable Diode Laser Absorption Spectroscopy for Hypersonic Wind Tunnel Testing

An accurate ultrasonic wind speed and direction measuring method by combining time-difference and phase-difference measurement using coded pulses combination

Low speed wind tunnel free-flight test of powered sub-scale aircraft

Afm with the Slope Compensation Technique for High-Speed Precision Measurement of Micro-Structured Surfaces

Remote and Feedback Control of the Flap Angle in a Wind Tunnel Test Model by Optical Measurement

Design of Optimal Fast Scanning Trajectory for the Mechanical Scanner of Measurement Instruments

A new type of aerodynamic measurement technology for vehicle model running on bridge under crosswind in wind tunnel test

Reserch on Technique of Large Aperture-Digital Wavefront Test

Measurement technology in hypersonic wind tunnel