Abstract:Current research in hypersonic wind tunnel aerodynamic testing predominantly focuses on small-scale and lightweight models, typically limited to scales of 4 m and weights under 1 ton. However, there's an emerging trend in the design of hypersonic vehicles towards larger scales and heavier loads, often surpassing 9 m in length and several tons in weight. This shift poses new challenges as there's a noticeable gap in research specifically addressing the aerodynamic testing needs of these larger-scale models. Firstly, this study aims to fill this gap by conducting an exhaustive analysis of the impact of the strain box-balance floating frame on aerodynamic force transmission characteristics. This analysis is crucial as it offers essential theoretical guidance for designing large-scale strain box-balances in pulse combustion wind tunnels. These designs are uniquely tailored to test large and heavy air-breathing hypersonic vehicles (AHVs), addressing a critical need in the field. Subsequently, this study developed an innovative large-scale strain box-balance, measuring 2.4 m, specifically devised for aerodynamically testing extensive AHVs. Finally, to validate the effectiveness of this new strain box-balance design, the study undertook a series of comprehensive tests. These included static calibration tests, floating frame stiffness tests, and wind tunnel tests. The results from these experiments were remarkable, demonstrating high sensitivity across each test channel of the box-balance. Specifically, the sensitivities were 1.308 kg/10μv in the drag force test channel, 1.464 kg/10μv in the lift force test channel, and 1.104 kg/10μv in the pitching moment test channel. Additionally, the hysteresis levels recorded were exceptionally low, at 0.489 %, 0.0649 %, and 0.0086 % respectively for each channel. These findings not only validate the technical efficacy of the large-scale strain box-balance but also mark a significant stride in hypersonic aerodynamic research, catering to the emergent requirements of larger, heavier hypersonic vehicle models.

Measurement technology in hypersonic wind tunnel

Force Measurement and Support Integrated Device in Hypersonic Wind Tunnel

A New Hypersonic Wind Tunnel Force Measurement System to Reduce Additional Bending Moment and Avoid Time-Varying Stiffness

Φ120 Hypersonic Wind Tunnel Flow Field Calibration

Short-time aerodynamic research for large scale test models in hypersonic wind tunnels

AERODYNAMIC DRAG MEASUREMENT IN A HIGH-ENTHALPY SHOCK TUNNEL

Dynamic test experiment system of single degree of freedom of Φ3.2 m wind tunnel

Direct force measurement tests with hypersonic ducted model

Wind Tunnel Measurement Systems for Unsteady Aerodynamic Forces on Bluff Bodies: Review and New Perspective

Design of a milli-newton force balance for hypersonic rarefied wind tunnel

Experimental Research on a Multi-modal Active Damping System for Transonic Wind-Tunnel Tests

A new type of aerodynamic measurement technology for vehicle model running on bridge under crosswind in wind tunnel test

Measurement and Control System for Ratory Balance Equipment in Wind Tunnel Test

Key technique for high angle of attack test of fighter aircraft in Φ3.2m low speed wind tunnel

Overview of dynamic test techniques at low speed aerodynamics institute , cardc

Application of continuous sweeping force measuring technology in large intermittent transonic wind tunnel

Study of aerodynamic performance for integrated hypersonic vehicle's scaled model in the nonuniform flow fields of wind tunnel

An Active Damping Vibration Control System for Wind Tunnel Models

Advance in the full-field intelligent sensing for large-scale wind tunnels

Research on Design Method of Inertial Interference Self-Compensating Balance

Scientific issue on model/support manufacturing, perception and control of aerodynamic elastic test in large wind tunnel